MW5IC2030NBR1 Datasheet, PDF (1/16 Pages) Freescale Semiconductor, Inc – RF LDMOS Wideband Integrated Power Amplifiers

Freescale Semiconductor
Technical Data
RF LDMOS Wideband Integrated
Power Amplifiers
The MW5IC2030N wideband integrated circuit is designed with on - chip
matching that makes it usable from 1930 to 1990 MHz. This multi - stage
structure is rated for 26 to 28 Volt operation and covers all typical cellular base
station modulation formats.
Final Application
• Typical CDMA Performance: V_DD = 27 Volts, I_DQ1 = 160 mA,
I_DQ2 = 230 mA, P_out = 5 Watts Avg., Full Frequency Band, IS - 95 CDMA
(Pilot, Sync, Paging, Traffic Codes 8 Through 13), Channel Bandwidth =
1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF.
Power Gain — 23 dB
Drain Efficiency — 20%
ACPR @ 885 kHz Offset — - 49 dBc in 30 kHz Channel Bandwidth
Driver Application
• Typical CDMA Performance: V_DD = 27 Volts, I_DQ1 = 220 mA, I_DQ2 =
240 mA, P_out = 1 Watt Avg., Full Frequency Band, IS - 95 CDMA (Pilot,
Sync, Paging, Traffic Codes 8 Through 13), Channel Bandwidth =
1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF.
Power Gain — 24 dB
ACPR @ 885 kHz Offset — - 63 dBc in 30 kHz Channel Bandwidth
• Capable of Handling 10:1 VSWR, @ 27 Vdc, 1990 MHz, 30 Watts CW
Output Power
• Stable into a 3:1 VSWR. All Spurs Below - 60 dBc @ 0 to 43 dBm CW
P_out.
• On - Chip Matching (50 Ohm Input, >4 Ohm Output)
• Integrated Temperature Compensation Capability with Enable/Disable
Function
• On - Chip Current Mirror g_m Reference FET for Self Biasing Application ⁽¹⁾
• Integrated ESD Protection
• 200°C Capable Plastic Package
• N Suffix Indicates Lead - Free Terminations. RoHS Compliant.
• In Tape and Reel. R1 Suffix = 500 Units per 44 mm, 13 inch Reel
Document Number: MW5IC2030N
Rev. 7, 1/2006
MW5IC2030NBR1
MW5IC2030GNBR1
1930 - 1990 MHz, 30 W, 26 V
GSM/GSM EDGE, W - CDMA, PHS
RF LDMOS WIDEBAND
INTEGRATED POWER AMPLIFIERS
CASE 1329 - 09
TO - 272 WB - 16
PLASTIC
MW5IC2030NBR1
CASE 1329A - 03
TO - 272 WB - 16 GULL
PLASTIC
MW5IC2030GNBR1
V_DS1
V_RD2
V_RG2
RF_in
V_RD1
V_RG1/V_GS1
V_GS2
Quiescent Current
Temperature Compensation
Figure 1. Functional Block Diagram
V_DS2/RF_out
GND
1
V_DS1
2
V_RD2
3
V_RG2
4
GND
5
RF_in
6
V_RD1
7
V_RG1/V_GS1
8
V_GS2
9
NC 10
GND ₁₁
16 GND
15 NC
14
V_DS2/
RF_out
13 NC
12 GND
(Top View)
Note: Exposed backside flag is source
terminal for transistors.
Figure 2. Pin Connections
1. Refer to AN1987, Quiescent Current Control for the RF Integrated Circuit Device Family. Go to http://www.freescale.com/rf.
Select Documentation/Application Notes - AN1987.
 Freescale Semiconductor, Inc., 2006. All rights reserved.
RF Device Data
Freescale Semiconductor
MW5IC2030NBR1 MW5IC2030GNBR1
1