MPMZ2202 Datasheet, PDF (1/7 Pages) Freescale Semiconductor, Inc – 200 kPa On-Chip Temperature Compensated and Calibrated Silicon Pressure Sensors

Freescale Semiconductor
Technical Data
200 kPa On-Chip Temperature
Compensated and Calibrated
Silicon Pressure Sensors
The MPMZ2202 device is a silicon piezoresistive pressure sensor providing a
highly accurate and linear voltage output directly proportional to the applied
pressure. The sensor is a single, monolithic silicon diaphragm with the strain
gauge and a thin-film resistor network integrated on-chip. The chip is laser
trimmed for precise span and offset calibration and temperature compensation.
Features
• Temperature Compensated Over 0°C to + 85°C
• Available in Easy-to-Use Tape and Reel
• Ratiometric to Supply Voltage
• Gauge Ported and Non Ported Options
• Increased media compatibility fluorocarbon gel
Typical Applications
• Pump/Motor Controllers
• Robotics
• Level Indicators
• Medical Diagnostics
• Pressure Switching
• Barometers
• Altimeters
ORDERING INFORMATION
Device
Type
Options
Case
No.
MPX Series
Order No.
Packing
Options
Device
Marking
Ported
Gauge, Axial 1320A MPMZ2202GS
Port
Rails MPMZ2202GS
Gauge, Axial 1320A MPMZ2202GST1 Tape & Reel MPMZ2202GS
Port
MPMZ2202
Rev 1, 09/2006
MPMZ2202
SERIES
COMPENSATED AND CALIBRATED
PRESSURE SENSOR
0 TO 200 kPA (0 TO 29 psi)
40 mV FULL SCALE SPAN
(TYPICAL)
MPAK PACKAGE
MPMZ2202GS
CASE 1320A-02
PIN NUMBER
1
GND
3
V_S
2
+V_OUT
4
-V_OUT
© Freescale Semiconductor, Inc., 2006. All rights reserved.