MP3H6115A Datasheet, PDF (1/12 Pages) Freescale Semiconductor, Inc – High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure On-Chip Signal Conditioned, Temperature Compensat

Freescale Semiconductor
Technical Data
High Temperature Accuracy
Integrated Silicon Pressure Sensor
for Measuring Absolute Pressure,
On-Chip Signal Conditioned,
Temperature Compensated
and Calibrated
Freescale's MP3H6115A series sensor integrates on-chip, bipolar op amp
circuitry and thin film resistor networks to provide a high output signal and
temperature compensation. The small form factor and high reliability of on-chip
integration make the Freescale pressure sensor a logical and economical choice
for the system designer.
The MP3H6115A series piezoresistive transducer is a state-of-the-art,
monolithic, signal conditioned, silicon pressure sensor. This sensor combines
advanced micromachining techniques, thin film metallization, and bipolar
semiconductor processing to provide an accurate, high level analog output signal
that is proportional to applied pressure.
Figure 1 shows a block diagram of the internal circuitry integrated on a
pressure sensor chip.
Features
• Improved Accuracy at High Temperature
• Available in Super Small Outline Package
• 1.5% Maximum Error over 0° to 85°C
• Ideally suited for Microprocessor or Microcontroller-Based Systems
• Temperature Compensated from -40° to +125°C
• Durable Thermoplastic (PPS) Surface Mount Package
Application Examples
• Aviation Altimeters
• Industrial Controls
• Engine Control/Manifold Absolute Pressure (MAP)
• Weather Station and Weather Reporting Device Barometers
ORDERING INFORMATION
Device
Type
Options
Case MPX Series
No.
Order No.
Basic Element Absolute, Element Only 1317 MP3H6115A6U
Absolute, Element Only 1317 MP3H6115A6T1
Ported
Element
Absolute, Axial Port
Absolute, Axial Port
1317A MP3H6115AC6U
1317A MP3H6115AC6T1
Packing
Options
Rails
Tape and Reel
Rails
Tape and Reel
Marking
MP3H6115A
MP3H6115A
MP3H6115A
MP3H6115A
MP3H6115A
Rev 2, 09/2006
MP3H6115A
SERIES
INTEGRATED
PRESSURE SENSOR
15 TO 115 KPA (2.2 TO 16.7 PSI)
0.12 TO 2.9 VOLTS OUTPUT
SUPER SMALL OUTLINE PACKAGE
MP3H6115A6U/T1
CASE 1317-04
MP3H6115AC6U/T1
CASE 1317A-03
PIN NUMBER
1
N/C
5
N/C
2
V_S
6
N/C
3
GND
7
N/C
4
V_OUT
8
N/C
NOTE: Pins 1, 5, 6, 7, and 8 are internal device
connections. Do not connect to external
circuitry or ground. Pin 1 is denoted by
the chamfered corner of the package.
© Freescale Semiconductor, Inc., 2006. All rights reserved.