|
MKE02P64M20SF0 Datasheet, PDF (1/36 Pages) Freescale Semiconductor, Inc – Operating characteristics : Flash write voltage range: 2.7 to 5.5 V | |||
|
Freescale Semiconductor
Data Sheet: Technical Data
Document Number MKE02P64M20SF0
Rev 3, 07/2013
KE02 Sub-Family
Supports the following:
MKE02Z16VLC2(R),
MKE02Z32VLC2(R),
MKE02Z64VLC2(R),
MKE02Z16VLD2(R),
MKE02Z32VLD2(R),
MKE02Z64VLD2(R),
MKE02Z32VLH2(R),
MKE02Z64VLH2(R),
MKE02Z32VQH2(R), and
MKE02Z64VQH2(R)
Key features
⢠Operating characteristics
â Voltage range: 2.7 to 5.5 V
â Flash write voltage range: 2.7 to 5.5 V
â Temperature range (ambient): -40 to 105°C
⢠Performance
â Up to 20 MHz ARM® Cortex-M0+ core
â Single cycle 32-bit x 32-bit multiplier
â Single cycle I/O access port
⢠Memories and memory interfaces
â Up to 64 KB flash
â Up to 256 B EEPROM
â Up to 4 KB RAM
⢠Clocks
â Oscillator (OSC) - loop-controlled Pierce
oscillator, crystal or ceramic resonator range of
31.25 kHz to 39.0625 kHz or 4 MHz to 20 MHz
â Internal clock source (ICS) - internal FLL with
internal or external reference, precision
trimming of internal reference allowing 1%
deviation across temperature range of 0 °C to
70 °C and 1.5% deviation across temperature
range of -40 °C to 105 °C, up to 20 MHz
â Internal 1 kHz low-power oscillator (LPO)
MKE02P64M20SF0
⢠System peripherals
â Power management module (PMC) with three
power modes: Run, Wait, Stop
â Low-voltage detection (LVD) with reset or
interrupt, selectable trip points
â Watchdog with independent clock source
(WDOG)
â Programmable cyclic redundancy check module
(CRC)
â Serial wire debug interface (SWD)
â Bit manipulation engine (BME)
⢠Security and integrity modules
â 64-bit unique identification (ID) number per chip
⢠Human-machine interface
â Up to 57 general-purpose input/output (GPIO)
â Two 8-bit keyboard interrupt modules (KBI)
â Interrupt (IRQ)
⢠Analog modules
â One 16-channel 12-bit SAR ADC, operation in
Stop mode, optional hardware trigger (ADC)
â Two analog comparators containing a 6-bit
DAC and programmable reference input
(ACMP)
⢠Timers
â One 6-channel FlexTimer/PWM (FTM)
â Two 2-channel FlexTimer/PWM (FTM)
â One 2-channel periodic interrupt timer (PIT)
â One real-time clock (RTC)
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2013 Freescale Semiconductor, Inc.
|
▷ |