MHW1244N Datasheet, PDF (1/4 Pages) Freescale Semiconductor, Inc – CATV Amplifier Module

Freescale Semiconductor
Technical Data
Document Number: MHW1244N
Rev. 4, 5/2006
CATV Amplifier Module
Features
• Specified for 12 - , 22 - and 26 - Channel Loading
• Excellent Distortion Performance
• Superior Gain, Return Loss and DC Current Stability over Temperature
• Capable of Handling Multiple Channels in the Return Path with Good
Distortion Performance
• Silicon Bipolar Transistor Technology
• Unconditionally Stable Under All Load Conditions
Applications
• CATV Systems Operating in the 5 to 200 MHz Frequency Range
• Designed for Broadband Applications Requiring Low Distortion
Characteristics
• Specified for Use as a Return Path Amplifier for Low - , Mid - and High - Split
2 - Way Cable TV Systems
Description
• 24 Vdc Supply, 5 to 200 MHz, CATV Reverse Amplifier
• Replaced MHW1244. There are no form, fit or function changes with this
part replacement.
• RoHS Compliant
MHW1244N
5 - 200 MHz, 24.0 dB
26 - CHANNEL
CATV HIGH - SPLIT
REVERSE AMPLIFIER
CASE 1302 - 01, STYLE 1
Table 1. Maximum Ratings
Rating
Symbol
Value
Unit
RF Voltage Input (Single Tone)
DC Supply Voltage
Operating Case Temperature Range
Storage Temperature Range
V_in
+ 65
dBmV
V_CC
+ 28
Vdc
T_C
- 20 to +100
°C
T_stg
- 40 to +100
°C
Table 2. Electrical Characteristics (V_CC = 24 Vdc, T_C = + 30°C, 75 W system)
Characteristic
Symbol
MHW1244
Units
Power Gain @ 10 MHz
Frequency Range (Response/Return Loss) ⁽¹⁾
G_p
24.0 ± 0.5
dB
BW
5.0- 200
MHz
Cable Slope Equivalent (5.0 - 200 MHz)
S
- 0.2 Min/+ 0.8 Max
dB
Gain Flatness (5.0 - 200 MHz)
Input/Output Return Loss (5.0 - 200 MHz) ⁽¹⁾
G_F
± 0.2 Max
dB
IRL/ORL
18.0 Min
dB
Cross Modulation Distortion @ +50 dBmV per ch.
12- Channel FLAT (5.0 - 120 MHz)
22 - Channel FLAT (5.0 - 175 MHz) ^{(2) (3)}
26- Channel FLAT (5.0 - 200 MHz)
XMD₁₂
XMD₂₂
XMD₂₆
- 66 Typ
dBc
- 61 Max
dBc
- 61 Typ
dBc
1. Response and return loss characteristics are tested and guaranteed for the full 5.0 - 200 MHz frequency range.
2. Freescale 100% distortion and noise figure testing is performed over the 5.0 - 175 MHz frequency range. Cross modulation and composite
triple beat testing are with 22 - channel loading; Video carriers used are:
T7 - T13
7.0 - 43.0 MHz
7 - Channels
2-6
55.25 - 83.25 MHz 5 - Channels
A-7
121.25 - 175.25 MHz 10- Channels
3. Video carriers used for 12- Channel typical performances are T7 - 6; For 26- Channel typical performance, Channels 8, 9, 10 and 11 are added
to the 22 - Channel carriers listed above.
© Freescale Semiconductor, Inc., 2006. All rights reserved.
RF Device Data
Freescale Semiconductor
MHW1244N
1