MCF5373 Datasheet, PDF (1/42 Pages) Freescale Semiconductor, Inc – Microprocessor Data Sheet

Freescale Semiconductor
Data Sheet: Advance Information
MCF5373DS
Rev. 0.3, 04/2006
MCF5373 ColdFire^®
Microprocessor Data Sheet
Supports MCF5372L, MCF5372, MCF5373L, & MCF5373
by: Microcontroller Division
The MCF537x devices are a family of highly-integrated
32-bit microprocessors based on the Version 3 ColdFire
microarchitecture. All MCF537x devices contain a
32-Kbyte internal SRAM, a Fast Ethernet controller, a
2-bank SDR/DDR SDRAM controller, a 16-channel
DMA controller, up to three UARTs, a queued SPI, as
well as other peripherals that enable the MCF537x
family for use in general purpose industrial control
applications. Optional peripherals include USB host and
On-the-Go controllers and cryptography hardware
accelerators.
This document provides an overview of the MCF537x
microprocessor family, focusing on its highly diverse
feature set. It was written from the perspective of the
MCF5373L device. However, it also pertains to the
MCF5372L, MCF5372, and MCF5373. See the
following section for a summary of differences between
the various devices of the MCF537x family.
Table of Contents
1 MCF537x Family Configurations .........................2
2 Ordering Information ...........................................3
3 Signal Descriptions..............................................3
4 Mechanicals and Pinouts ....................................8
5 Preliminary Electrical Characteristics ................14
6 Revision History ................................................40
This document contains information on a new product. Specifications and information herein
are subject to change without notice.
© Freescale Semiconductor, Inc., 2006. All rights reserved.
• Preliminary