MCF52235_10 Datasheet, PDF (1/54 Pages) Freescale Semiconductor, Inc – MCF52235 ColdFire Microcontroller Data Sheet

Freescale Semiconductor
Data Sheet: Technical Data
Document Number: MCF52235DS
Rev. 9, 7/2010
MCF52235
LQFP-80
14mm x 14mm
LQFP-112
20mm_x_20mm
MCF52235 ColdFire
Microcontroller Data Sheet
MAPBGA-121
12mm_x_12mm
The MCF52235 is a member of the ColdFire^® family of
reduced instruction set computing (RISC) microcontrollers.
This document provides an overview of the MCF52235
microcontroller family, focusing on its highly integrated and
diverse feature set.
This 32-bit device is based on the Version 2 ColdFire core
operating at a frequency up to 60 MHz, offering high
performance and low power consumption. On-chip memories
connected tightly to the processor core include up to 256
Kbytes of Flash and 32 Kbytes of static random access
memory (SRAM). On-chip modules include:
• V2 ColdFire core providing 56 Dhrystone 2.1 MIPS @ 60
MHz executing out of on-chip Flash memory using
enhanced multiply accumulate (EMAC) and hardware
divider
• Enhanced Multiply Accumulate Unit (EMAC) and
hardware divide module
• Cryptographic Acceleration Unit (CAU) coprocessor
• Fast Ethernet Controller (FEC)
• On-chip Ethernet Transceiver (EPHY)
• FlexCAN controller area network (CAN) module
• Three universal asynchronous/synchronous
receiver/transmitters (UARTs)
• Inter-integrated circuit (I²C™) bus controller
• Queued serial peripheral interface (QSPI) module
• Eight-channel 10- or 12-bit fast analog-to-digital converter
(ADC)
• Four channel direct memory access (DMA) controller
• Four 32-bit input capture/output compare timers with
DMA support (DTIM)
• Four-channel general-purpose timer (GPT) capable of
input capture/output compare, pulse width modulation
(PWM) and pulse accumulation
• Eight/Four-channel 8/16-bit pulse width modulation timers
(two adjacent 8-bit PWMs can be concatenated to form a
single 16-bit timer)
• Two 16-bit periodic interrupt timers (PITs)
• Real-time clock (RTC) module
• Programmable software watchdog timer
• Two interrupt controllers providing every peripheral with a
unique selectable-priority interrupt vector plus seven
external interrupts with fixed levels/priorities
• Clock module with support for crystal or external oscillator
and integrated phase-locked loop (PLL)
• Test access/debug port (JTAG, BDM)
Freescale reserves the right to change the detail specifications as may be required to permit
improvements in the design of its products.
© Freescale Semiconductor, Inc., 2010. All rights reserved.