|
MC9S08LL8CLF Datasheet, PDF (1/44 Pages) Freescale Semiconductor, Inc – MC9S08LL16 Series | |||
|
Freescale Semiconductor
Data Sheet: Technical Data
An Energy Efficient Solution by Freescale
Document Number: MC9S08LL16
Rev. 7, 1/2013
MC9S08LL16 Series
Covers: MC9S08LL16 and
MC9S08LL8
Features
⢠8-Bit HCS08 Central Processor Unit (CPU)
â Up to 20-MHz CPU at 3.6V to 1.8V across temperature range
of -40°C to 85°C
â HC08 instruction set with added BGND instruction
â Support for up to 32 interrupt/reset sources
⢠On-Chip Memory
â Dual Array FLASH read/program/erase over full operating
voltage and temperature
â Random-access memory (RAM)
â Security circuitry to prevent unauthorized access to RAM and
FLASH contents
⢠Power-Saving Modes
â Two low power stop modes
â Reduced power wait mode
â Low power run and wait modes allow peripherals to run while
voltage regulator is in standby
â Peripheral clock gating register can disable clocks to unused
modules, thereby reducing currents.
â Very low power external oscillator that can be used in stop2 or
stop3 modes to provide accurate clock source to real time
counter
â 6 usec typical wake up time from stop3 mode
⢠Clock Source Options
â Oscillator (XOSC) â Loop-control Pierce oscillator; Crystal
or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz
to 16 MHz
â Internal Clock Source (ICS) â Internal clock source module
containing a frequency-locked-loop (FLL) controlled by
internal or external reference; precision trimming of internal
reference allows 0.2% resolution and 2% deviation over
temperature and voltage; supports bus frequencies from 1MHz
to 10 MHz.
⢠System Protection
â Watchdog computer operating properly (COP) reset with
option to run from dedicated 1-kHz internal clock source or
bus clock
â Low-Voltage Warning with interrupt
â Low-Voltage Detection with reset or interrupt
â Illegal opcode and illegal address detection with reset
â Flash block protection
⢠Development Support
â Single-wire background debug interface
â Breakpoint capability to allow single breakpoint setting during
in-circuit debugging (plus two more breakpoints in on-chip
debug module)
64-LQFP
Case 840F
48-LQFP
Case 932
48-QFN
1314
â On-chip in-circuit emulator (ICE) debug module containing
three comparators and nine trigger modes. Eight deep FIFO for
storing change-of-flow addresses and event-only data. Debug
module supports both tag and force breakpoints
⢠Peripherals
â LCD â 4x28 or 8x24 LCD driver with internal charge pump
and option to provide an internally regulated LCD reference
that can be trimmed for contrast control.
â ADC â 8-channel, 12-bit resolution; 2.5 μs conversion time;
automatic compare function; temperature sensor; internal
bandgap reference channel; operation in stop3; fully functional
from 3.6V to 1.8V
â ACMP â Analog comparator with selectable interrupt on
rising, falling, or either edge of comparator output; compare
option to fixed internal bandgap reference voltage; outputs can
be optionally routed to TPM module; operation in stop3
â SCI â Full duplex non-return to zero (NRZ); LIN master
extended break generation; LIN slave extended break
detection; wake up on active edge
â SPIâ Full-duplex or single-wire bidirectional;
Double-buffered transmit and receive; Master or Slave mode;
MSB-first or LSB-first shifting
â IIC â IIC with up to 100 kbps with maximum bus loading;
Multi-master operation; Programmable slave address;
Interrupt driven byte-by-byte data transfer; supports broadcast
mode and 10-bit addressing
â TPMx â Two 2-channel (TPM1 and TPM2); Selectable input
capture, output compare, or buffered edge- or center-aligned
PWM on each channel;
â TODâ (Time Of Day) 8-bit quarter second counter with
match register; External clock source for precise time base,
time-of-day, calendar or task scheduling functions; Free
running on-chip low power oscillator (1 kHz) for cyclic
wake-up without external components.
⢠Input/Output
â 38 GPIOs, 2 output-only pins
â 8 KBI interrupts with selectable polarity
â Hysteresis and configurable pull up device on all input pins;
Configurable slew rate and drive strength on all output pins.
⢠Package Options
â 64-LQFP, 48-LQFP and 48-QFN
|
▷ |