English
Language : 

MC33911_10 Datasheet, PDF (1/92 Pages) Freescale Semiconductor, Inc – LIN System Basis Chip with DC Motor Pre-driver
Freescale Semiconductor
Advance Information
MC33910G5AC/MC3433910G5AC
Document Number: MC33911
Rev. 8.0, 3/2010
LIN System Basis Chip with DC
Motor Pre-driver
33911
The 33911G5/BAC is a Serial Peripheral Interface (SPI) controlled
System Basis Chip (SBC), combining many frequently used functions
in an MCU based system, plus a Local Interconnect Network (LIN)
transceiver. The 33911 has a 5.0 V, 50 mA/60 mA low dropout
regulator with full protection and reporting features. The device
provides full SPI readable diagnostics and a selectable timing
watchdog for detecting errant operation. The LIN Protocol Specification
2.0 and 2.1 compliant LIN transceiver has waveshaping circuitry that
can be disabled for higher data rates.
One 50 mA/60 mA high side switch and two 150 mA/160 mA low
side switches with output protection are available. All outputs can be
pulse-width modulated (PWM). Two high voltage inputs are available
for use in contact monitoring, or as external wake-up inputs. These
inputs can be used as high voltage Analog Inputs. The voltage on these
pins is divided by a selectable ratio and available via an analog
multiplexer.
The 33911 has three main operating modes: Normal (all functions
available), Sleep (VDD off, wake-up via LIN, wake-up inputs (L1, L2),
cyclic sense and forced wake-up), and Stop (VDD on with limited current
capability, wake-up via CS, LIN bus, wake-up inputs, cyclic sense,
forced wake-up and external reset).
The 33911 is compatible with LIN Protocol Specification 2.0, 2.1, and
SAEJ2602-2.
SYSTEM BASIS CHIP WITH LIN
2ND GENERATION
AC SUFFIX (Pb-FREE)
98ASH70029A
32-PIN LQFP
ORDERING INFORMATION
Features
• Full-duplex SPI interface at frequencies up to 4.0 MHz
• LIN transceiver capable of up to 100 kbps with wave shaping
Device
MC33911G5AC/R2
Temperature
Range (TA)
- 40°C to 125°C
• One 50 mA/60 mA high side and two 150 mA/60 mA low side
protected switches
• Two high voltage analog/logic Inputs
MC34911G5AC/R2
MC33911BAC/R2
-40°C to 85°C
- 40°C to 125°C
• Configurable window watchdog
MC34911BAC/R2
-40°C to 85°C
• 5.0 V low drop regulator with fault detection and low voltage reset
(LVR) circuitry
* See Page 2 for Device Variations
• Pb-free packaging designated by suffix code AC
VBAT
33911
VS1
VSENSE
VS2
HS1
Package
32-LQFP
L1
LIN INTERFACE
LIN
L2
VDD
PWMIN
ADOUT0
LS1
M
MCU
MOSI
LS2
MISO
SCLK
CS
RXD
WDCONF
TXD
IRQ
RST
Figure 1. 33911 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2009 - 2010. All rights reserved.