KL26P121M48SF4 Datasheet, PDF (1/60 Pages) Freescale Semiconductor, Inc – Operating Characteristics Voltage range: 1.71 to 3.6 V

Freescale Semiconductor
Data Sheet: Technical Data
Document Number: KL26P121M48SF4
Rev. 2, 10/2013
KL26 Sub-Family Data Sheet
Supports the following:
MKL26Z256VLH4, MKL26Z256VMP4,
MKL26Z128VLL4, MKL26Z256VLL4,
MKL26Z128VMC4, MKL26Z256VMC4
Features
• ^{Operating Characteristics}
– Voltage range: 1.71 to 3.6 V
– Flash write voltage range: 1.71 to 3.6 V
– Temperature range (ambient): -40 to 105°C
• ^Performance
– Up to 48 MHz ARM® Cortex-M0+ core
• ^{Memories and memory interfaces}
– Up to 256 KB program flash memory
– Up to 32 KB RAM
• ^Clocks
– 32 kHz to 40 kHz or 3 MHz to 32 MHz crystal
oscillator
– Multi-purpose clock source
• ^{System peripherals}
– Nine low-power modes to provide power
optimization based on application requirements
– 4-channel DMA controller, supporting up to 63
request sources
– COP Software watchdog
– Low-leakage wakeup unit
– SWD interface and Micro Trace buffer
– Bit Manipulation Engine (BME)
• ^{Security and integrity modules}
– 80-bit unique identification (ID) number per chip
KL26P121M48SF4
• ^{Human-machine interface}
– Low-power hardware touch sensor interface (TSI)
– General-purpose input/output
• ^{Analog modules}
– 16-bit SAR ADC
– 12-bit DAC
– Analog comparator (CMP) containing a 6-bit DAC
and programmable reference input
• ^Timers
– Six channel Timer/PWM (TPM)
– Two 2-channel Timer/PWM (TPM)
– Periodic interrupt timers
– 16-bit low-power timer (LPTMR)
– Real-time clock
• ^{Communication interfaces}
– USB full-/low-speed On-the-Go controller with on-
chip transceiver and 5 V to 3.3 V regulator
– Two 16-bit SPI modules
– Two I2C modules
– I2S (SAI) module
– One low power UART module
– Two UART modules
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2012–2013 Freescale Semiconductor, Inc.