|
K10P100M72SF1 Datasheet, PDF (1/73 Pages) Freescale Semiconductor, Inc – K10 Sub-Family | |||
|
Freescale Semiconductor
Data Sheet: Technical Data
Document Number: K10P100M72SF1
Rev. 2, 4/2012
K10 Sub-Family
Supports: MK10DX128VLL7,
MK10DX256VLL7, MK10DX128VML7,
MK10DX256VML7
Features
⢠Operating Characteristics
â Voltage range: 1.71 to 3.6 V
â Flash write voltage range: 1.71 to 3.6 V
â Temperature range (ambient): -40 to 105°C
⢠Clocks
â 3 to 32 MHz crystal oscillator
â 32 kHz crystal oscillator
â Multi-purpose clock generator
⢠System peripherals
â 10 low-power modes to provide power optimization
based on application requirements
â 16-channel DMA controller, supporting up to 63
request sources
â External watchdog monitor
â Software watchdog
â Low-leakage wakeup unit
⢠Security and integrity modules
â Hardware CRC module to support fast cyclic
redundancy checks
â 128-bit unique identification (ID) number per chip
⢠Human-machine interface
â Low-power hardware touch sensor interface (TSI)
â General-purpose input/output
K10P100M72SF1
⢠Analog modules
â Two 16-bit SAR ADCs
â Programmable gain amplifier (PGA) (up to x64)
integrated into each ADC
â 12-bit DAC
â Three analog comparators (CMP) containing a 6-bit
DAC and programmable reference input
â Voltage reference
⢠Timers
â Programmable delay block
â Eight-channel motor control/general purpose/PWM
timer
â Two 2-channel quadrature decoder/general purpose
timers
â Periodic interrupt timers
â 16-bit low-power timer
â Carrier modulator transmitter
â Real-time clock
⢠Communication interfaces
â Controller Area Network (CAN) module
â Two SPI modules
â Two I2C modules
â Five UART modules
â I2S module
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2012 Freescale Semiconductor, Inc.
|
▷ |