07XSC200 Datasheet, PDF (1/51 Pages) Freescale Semiconductor, Inc – Dual High Side Switch

Freescale Semiconductor
Advance Information
Document Number: MC07XSC200
Rev. 2.0, 9/2013
Dual High Side Switch
(7.0 mOhm)
07XSC200
The 07XSC200 is one in a family of devices designed for low-voltage
lighting or factory automation applications. Its two low R_DS(ON)
MOSFETs (dual 7.0 m) can control two separate 55 W / 28 W bulbs,
and/or Xenon modules, and/or LEDs, and/or DC low voltage motors.
Programming, control and diagnostics are accomplished using a 16-bit
SPI interface. Its output with selectable slew rate improves
electromagnetic compatibility (EMC) behavior. Additionally, each
output has its own parallel input or SPI control for pulse-width
modulation (PWM) control if desired. The 07XSC200 allows the user to
program via the SPI, the fault current trip levels and duration of
acceptable inrush. The device has Fail-safe mode to provide fail-safe
functionality of the outputs in case of MCU damaged.
The 07XSC200 is packaged in a Pb-free power-enhanced 32 pins
SOIC package with exposed tab.
This device is powered by SMARTMOS technology.
Features
• Dual 7.0 m max high side switch (at 25 °C)
• Operating voltage range of 6.0 to 20 V with sleep current < 5.0 µA,
extended mode from 4.0 to 28 V
• 8.0 MHz 16-bit 3.3 V and 5.0 V SPI control and status reporting with
daisy chain capability
• PWM module using external clock or calibratable internal oscillator
with programmable outputs delay management
• Smart overcurrent shutdown compliant to huge inrush current,
severe short-circuit, overtemperature protections with time limited
auto-retry, and Fail-safe mode, in case of MCU damage
• Output OFF or ON OpenLoad detection compliant to bulbs or LEDs
and short to battery detection. Analog current feedback with
selectable ratio and board temperature feedback.
HIGH SIDE SWITCH
EK SUFFIX PB-FREE
98ASA00368D
32-PIN EXPOSED PAD SOIC
ORDERING INFORMATION
Device
Temperature
Range (T_A)
Package
MC07XSC200EK
- 40 to 125 °C
32 SOIC
V_DD
V_DD
MCU
I/O
I/O
SO
SCLK
CSB
SI
I/O
I/O
I/O
I/O
A/D
V_DD
V_PWR
07XSC200
VDD
VPWR
FSB
WAKE
SI
HS1
SCLK
CSB
SO
HS0
RSTB
CLOCK
IN0
IN1
CSNS
FSI
GND
GND
LOAD
LOAD
Figure 1. 07XSC200 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2013. All rights reserved.