06XS3517_V3 Datasheet, PDF (1/42 Pages) Freescale Semiconductor, Inc – Smart High Side Switch Module

Freescale Semiconductor
Advance Information
Document Number: MC06XS3517
Rev. 3.0, 9/2012
Smart High Side Switch Module
(Triple 6.0 mΩ and Dual 17 mΩ)
06XS3517
The 06XS3517 device is a five channel 12 V high side switch
module with integrated control and a high number of protective and
diagnostic functions. It is designed for automotive lighting and
industrial applications. The low R_DS(ON) channels (three 6.0 mΩ, two
17 mΩ) can control different types of lighting applications; bulbs,
Xenon-HID lights, and LEDs. Control, device configuration, and
diagnostics are performed through a 16-bit SPI interface (3.3 V or
5.0 V). When communication with the external microcontroller or VDD
is lost, the device enters a fail-safe operation mode, but remains
operational, controllable, and protected.
The channels are controlled by an external clock signal and allow
staggered switch-on delay, to improve EMC performances.
Programmable output voltage slew rates (individually programmable)
further helps improve EMC performance. To avoid shutting off the
device upon inrush current while still being able to closely track the load
current, a dynamic over-current threshold profile is featured. Load
current in each channel can be sensed. The duty cycle of the channels
can be controlled independently and the switching frequency of each
of them can be doubled.
HIGH SIDE SWITCH
Bottom View
FK SUFFIX (PB-FREE)
98ART10511D
24-PIN PQFN
Features
• Three 6.0 mΩ and Two 17 mΩ protected high side switches
• Optional sixth channel with an external SMART MOSFET
• 16-bit SPI communication interface with daisy chain capability
• Accurate temperature & current sensing
• Fail-safe mode including autorestart
• PWM with programmable switch-on delay and frequency
prescaler
• Over-voltage, under-voltage, over-current, over-temperature,
and reverse battery protections
• Dedicated bulb over-current protection with inrush current
handling
• Sleep mode with low current consumption
• Normal operating range 7.0 V to 20 V, extended operating range
6.0 V - 28 V
ORDERING INFORMATION
Device
Temperature
Range (T_A)
Package
MC06XS3517AFK -40 °C to 125 °C 24 PQFN
MCU
12 V 5.0 V
Watchdog
06XS3517
VCC
VBAT
LIMP
FLASHER
IGN
CP
OUT1
RSTB
CLOCK
CSB
OUT2
OUT3
FOG
OUT4
SO
SI
SCLK
OUT5
FETIN
CSNS GND FETOUT
12 V
Smart
Switch
Figure 1. 06XS3517 Simplified Application Diagram
* This document contains certain information on a new product.
Specifications and information herein are subject to change without notice.
© Freescale Semiconductor, Inc., 2012. All rights reserved.