FXU-PC52 Datasheet, PDF (6/11 Pages) Fox Electronics – LVPECL 5 x 3.2mm 2.5V Oscillator

PRELIMINARY SPECIFICATIONS
FXU-PC52 Series
Pin Description and Recommended Circuit
Pin # Name
Type
Function
1
E/D¹
2
NC²
Input
Enable / Disable Control of Output (0 = Disabled)
No Connection – Leave OPEN
3
GND
Ground
Electrical Ground for V_DD
4
Output
Output
LVPECL Oscillator Output
5
Output 2
Output
Complementary LVPECL Output
6
V_DD ³
Power
Power Supply Source Voltage
NOTES:
1 _{Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect. (Also see note 2)}
2 _{An optional pin # 2 Enable / Disable is available.}
3 _{Installation should include a 0.01µF bypass capacitor placed between VDD}
(Pin 6) and GND (Pin 3) to minimize power supply line noise.
E/D ₁
6 ^VDD
NC ₂
5 ^{Output 2}
GND ₃
4 ^Output
Terminations as viewed from the Top
NOTE: XPRESSO-ULTRA LVPECL XOs are designed to
fit on Industry Standard, 6 pad layouts
Enable / Disable Control
Pin # 1 (state)
OPEN _{(No Connection)}
“1” Level V_IH ≥ 70% V_DD
“0” Level V_IL ≤ 30% V_DD
Output (Pin # 4, Pin # 5)
ACTIVE Output
ACTIVE Output
High Impedance
Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX)
260°C
225°C
180°C
Ramp-Up
3°C/s Max
tp
10 Seconds Max
within 5°C of 260°C peak
50±10 Seconds
Above 225°C Reflow Area
Ramp Down
Not to exceed 6°C/s
160°C
120 ± 20 Seconds
In Pre-heating Area
25°C
400 Seconds MAX from +25°C to 260°C peak
Page 6 of 11
© 2014 FOX ELECTRONICS | ISO9001:2008 Certified
An Integrated Device Technology, Inc. company