KFO Datasheet, PDF (1/1 Pages) Fox Electronics – 5.0V PLASTIC HCMOS/TTL SMD OSCILLATOR

5.0V PLASTIC HCMOS/TTL SMD OSCILLATOR
KFO SERIES
FEATURES
• 5.0V Operation
• HCMOS/TTL Output
• Tri-State Enable/Disable
• Tape and Reel (1,000 pcs. STD)
OPTIONS
• 3.3V Operation (KFO30AT)
Discontinued
• MODEL NUMBER SELECTION
Model Number
KFO90AT
KFO90FT
KFO95AT
Frequency
Stability¹
±100PPM
±100PPM
±50PPM
Operating
Temperature (ºC)
-10 ~ +70
-40 ~ +85
-10 ~ +70
Frequency
Range (MHz)
1.500 ~ 67.000
1.500 ~ 67.000
1.500 ~ 67.000
• ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency Range (FO)
Storage Temperature Range (TSTG)
Supply Voltage (VDD)
Input Current (IDD)
1.500 ~ 32.000 MHz
32.000+ ~ 50.000 MHz
50.000+ ~ 67.000 MHz
Output Symmetry (50% VDD)
1.500 ~ 50.000 MHz
50.000+ ~ 67.000 MHz
Rise Time (10% ~ 90% VDD) (TR)
Fall Time (90% ~ 10% VDD) (TF)
Output Voltage (VOL)
(VOH)
Output Current (IOL)
(IOH)
Output Load
TTL
HCMOS
Start-up Time (TS)
Enable/Disable Time ²
MAX (unless otherwise noted)
1.500 ~ 67.000 MHz
-55ºC ~ +125ºC
5.0V ± 10%
27mA
45mA
60mA
45% ~ 55%
40% ~ 60%
7nS
7nS
10% VDD
90% VDD Min
16mA Min
-16mA Min
10TTL
50pF
10mS
100nS
1 _{Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,}
shock, and vibration.
2 _{An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.}
See page 30 for mechanical specifications, test circuits, and output waveform.
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
All specifications subject to change without notice. Rev. 02/10/03
All dimensions are in millimeters.
• ENABLE / DISABLE FUNCTION
INH (Pin 1)
OPEN ²
'1' Level VIH ≥ 2.2 V
'0' Level VIL ≤ 0.8 V
OUTPUT (Pin 3)
ACTIVE
ACTIVE
High Z
See page 60 for tape and reel specifications.
54 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +001(239)693-0099 FAX [phone] http://www.foxonline.com
© 2003 FOX ELECTRONICS