HC80U Datasheet, PDF (1/1 Pages) Fox Electronics – RESISTANCE WELD THRU-HOLE CRYSTAL

RESISTANCE WELD THRU-HOLE CRYSTAL
MODEL: HC80U
FEATURES
• High Frequency Range
• Fundamental to 50 MHz
• Resistance Weld
OPTIONS
• Tolerances to < 5 PPM
• Stabilities to < 3 PPM
• Temperatures to -40ºC ~ -85ºC
• SMD Gullwing (HC80UW)
• PART NUMBER ^{Learn More - Internet Required}
Part Number
282-Frequency-xxxxx
Model Number
HC80U
Frequency Range (MHz)
3.579545 ~ 200.000
• STANDARD SPECIFICATIONS¹
PARAMETERS
MAX (unless otherwise noted)
Frequency Range
3.579545 ~ 200.000 MHz
Frequency Tolerance @ 25ºC
±30 PPM
Frequency Stability, ref @ 25ºC
Over Operating Temp Range
±50 PPM
Temperature Range
Operating (TOPR)
-20ºC ~ +70ºC
Storage
(TSTG)
-40ºC ~ +85ºC
Shunt Capacitance (Co)
7.0 pF
Load Capacitance (CL)
10 pF ~ Series
(Customer Specified)
Drive Level
1.0 mW
Aging per year
±3 PPM
1 _{Other tolerances, stabilities & operating temperature ranges available. Consult Fox Customer Service for}
specific requirements.
All specifications subject to change without notice. Rev. 6/1/04
Frequency Range
(MHz)
3.579545 ~ 4.000
4.000+ ~ 5.000
5.000+ ~ 6.000
6.000+ ~ 7.000
7.000+ ~ 8.000
8.000+ ~ 10.000
10.000+ ~ 11.000
11.000+ ~ 50.000
25.000 ~ 65.000
60.000 ~ 130.000
130.000+ ~ 200.000
Operating Mode
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
3rd OT
5th OT
7th OT
Max ESR Ω
300
250
180
120
100
90
60
40
60
100
150
Learn more about:
Part Marking Identification
Internet required
All dimensions are in millimeters.
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA [phone] FAX [phone] http://www.foxonline.com 23
© 2004 FOX ELECTRONICS