HC49SD Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – RESISTANCE WELD SMD CRYSTAL

RESISTANCE WELD SMD CRYSTAL
MODEL: HC49SD SERIES
FEATURES
OPTIONS
• Low Cost
• Tolerances to < 10 PPM
• Stock Standard
• Stabilities to < 5 PPM
• Fundamental to 50 MHz (BT Cut) • Temperatures to -40ºC ~ -85ºC
• Tape and Reel (1,000 pcs. STD) • 4 Pad HC49SPX (Alternate to FPX)
• 3.2mm Height Max (HC49SSD)
DISCONTINUED
• PART NUMBER SELECTION^{Learn More - Internet Required}
PARAMETERS
Frequency Range
Frequency Tolerance @ 25ºC
Frequency Stability, ref @ 25ºC
Over Operating Temp Range
Temperature Range
Operating (TOPR)
Storage
(TSTG)
Shunt Capacitance (Co)
Load Capacitance
(CL)
Drive Level
Aging per year
MAX (unless otherwise noted)
3.200 ~ 70.000 MHz
±50 PPM ^1,2
±50 PPM ¹
-10ºC ~ +70ºC ¹
-40ºC ~ +85ºC
7 pF
10 pF ~ Series
(Customer Specified)
0.5 mW
±5 PPM
1 _{Other tolerances, stabilities & operating temperature ranges available. Consult Fox Customer}
Service for specific requirements.
2 _{Crystal has a ±30ppm tolerance specification for all standard part numbers. These part numbers are}
listed in the Fox catalog on the Standard Crystal table.
All specifications subject to change without notice. Rev. 3/9/05
Frequency Range
(MHz)
3.200 ~ 3.500
3.500+ ~ 4.000
4.000+ ~ 5.000
5.000+ ~ 6.000
6.000+ ~ 7.000
7.000+ ~ 9.000
9.000+ ~ 13.000
13.000+ ~ 20.000
20.000+ ~ 50.000
27.000 ~ 70.000
Operating Mode
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
3rd OT
Max ESR Ω
300
200
150
120
100
80
60
40
30
100
Learn more about:
Part Marking Identification
Tape and Reel Specification
Internet required
All dimensions are in millimeters.
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239) 693.0099 FAX [phone] http://www.foxonline.com
EMEA Munich, Germany +49 0 89.90936870 FAX [phone] | Asia Hong Kong +852.2854.4285 FAX [phone]
9
© 2005 FOX ELECTRONICS