FXA135 Datasheet, PDF (1/2 Pages) Fox Electronics – Ceramic Automotive Grade SMD Tuning Fork

Ceramic Automotive Grade SMD Tuning Fork
Model: FXA135
Page 1 of 2
RoHS Compliant / Pb Free / REACH Compliant
Rev. 1/29/2014
http://www.foxonline.com/need_a_sample.htm
FEATURES
• AEC-Q200 Qualified
• Ultra Low Profile
• 0.9mm Height
• Long Term Stability
• Tape and Reel (3,000 pcs. STD)
• PART NUMBER
Part Number
Model Number
739A-Frequency-xxxxx
FXA135
Frequency Range (MHz)
32.768 kHz
• STANDARD SPECIFICATIONS
PARAMETERS
MAX (unless otherwise noted)
Frequency
Frequency Tolerance @ 25ºC
Frequency Stability, ref @ 25ºC
32.768 kHz
±20 PPM
(Temperature Coefficient)
Temperature Range
-0.04 PPM / (ƼC)²
Turnover (TO)
Operating (TOPR)
Storage (TSTG)
Equivalent Series Resistance (RS)
Load Capacitance (Cl)
Insulation Resistance @ 100VDC
Drive Level
+20ºC ~ +30ºC
-40ºC ~ +125ºC
-40ºC ~ +125ºC
80 kΩ
12.5pF (Standard)*
500 MΩ Min
0.5 µW
Aging per year
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
0.1 µW Typ.
±3 PPM
260ºC / 10 Seconds
1
Au over Ni
* _{Other CLs available with conditions. Contact Fox Technical Support for specific requirements.}
Note: Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, etc. may vary.
The above specifications, having been carefully prepared and checked, are believed to be accurate at the time
of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies.
All dimensions are in millimeters.
Fox Electronics
5570 Enterprise Parkway
Fort Myers, Florida 33905
USA +1.239.693.0099
FAX [phone]
An Integrated Device Technology, Inc. company
FOXonline.com
75