FTE5-AH Datasheet, PDF (1/1 Pages) Fox Electronics – EURO Package Precision OCXO

EURO Package Precision OCXO
Model: FTE5_ _AH Series
Page 1 of 1
Preliminary
Rev. 11/10/2006
http://www.foxonline.com/need_a_sample.htm
FEATURES
• 5.0V Operation
• 12V Available
• HCMOS Output
• SC Cut Resonators
• EURO Package
• 1" x 1.4" x .75"
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Part Number
Model
Frequency
Operating *Frequency
Number Stability vs. Temp Temperature Range (MHz)
693-Frequency-xxxxx FTE501AH
±7 PPB
0 ~ +70ºC 5.000 ~ 50.000
694-Frequency-xxxxx FTE502AH
±10 PPB
-20 ~ +70ºC 5.000 ~ 50.000
695-Frequency-xxxxx FTE503AH
±15 PPB
-40 ~ +75ºC 5.000 ~ 50.000
• ELECTRICAL CHARACTERISTICS
PARAMETERS
MAX (unless otherwise noted)
Frequency Range (Fo)
5.000 ~ 50.000 MHz*
Supply Voltage
+5 VDC ± 5%
Power (Warm-Up for 3 minutes)
3 Watts
Power Stabilized at +25ºC (Still air)
0.8 Watts Typical
Voltage (± 5% Change)
±2 PPB
Short Term Aging (3 weeks min operation) ± 0.5 PPB / Day
Long Term Aging (After 60 days operation) ± 50 PPB / Year
Allan Variance (1 sec samples)
10^-11 / Sec
Phase Noise (Offset)
(Typical @ 10 MHz)
10 Hz
-120 dBc
100 Hz
-140 dBc
1 KHz
-155 dBc
10 KHz
-158 dBc
Warm-Up to within ± 100 PPB
(Referenced to freq after 1/2 hour power on) 3 minutes
Frequency Adjust (0 to +5 VDC)
± 0.5 PPM Min.
Slope
Positive
Non-Linearity (0.8V-5.0V)
± 10%
Input Impedance
> 100 K Min
Output (Typical @ 10 MHz)
HCMOS
Vol
10% Vdd
Voh
90%Vdd Min
T-rise (10% ~ 90% Vdd)
5 nS
T-fall (90% ~ 10% Vdd)
5 nS
Duty Cycle @ 50% Vdd
50% ± 5%
Resonator Type
Glass Sealed, SC Cut
All specifications subject to change without notice.
*Specifications are applicable to 10 MHz units. Performance at other frequencies will vary
from these values. Other frequencies and performance is available.
Contact Fox Custom Products Center (CPC) for details at 877-369-8041 or
email at http://www.foxonline.com/email.htm
"Pin numbers
are for
reference only"
Unless otherwise specified, tolerances are ±0.26
All dimensions are in millimeters.
Pin Connections
#1) Trim
#2) N.C. or trim reference Voltage
#3) VDD
#4) Output
#5) GND / Case
Case Material: Steel
Plating: Nickel
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX [phone] http://www.foxonline.com
EMEA Tel/Fax: [phone] | Asia Hong Kong Tel: [phone] Fax [phone] | Taiwan Tel: [phone] Fax [phone] | Japan Tel: [phone] Fax: [phone]
© 2006 FOX ELECTRONICS | ISO9001:2000 Certified