FPC5-AH Datasheet, PDF (1/1 Pages) Fox Electronics – 50.8mm x 50.8mm Precision OCXO

50.8mm x 50.8mm Precision OCXO
Model: FPC5_ _AH Series
Page 1 of 1
Preliminary
Rev. 11/10/2006
http://www.foxonline.com/need_a_sample.htm
FEATURES
• 5.0V Operation
• HCMOS Output
• 50.8 x 50.8 x 20.5mm
• SC Cut Resonators
"Pin numbers
are for
reference only"
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Part Number
Model
Frequency
Operating *Frequency
Number Stability vs. Temp _{Temperature Range (MHz)}
687-Frequency-xxxxx FPC501AH
±2 PPB
0 ~ +50 ºC 5.000 ~ 50.000
688-Frequency-xxxxx FPC502AH
±5 PPB
-20 ~ +70 ºC 5.000 ~ 50.000
689-Frequency-xxxxx FPC503AH
±10 PPB
-40 ~ +75 ºC 5.000 ~ 50.000
• ELECTRICAL CHARACTERISTICS
PARAMETERS
MAX (unless otherwise noted)
Frequency Range (Fo)
Supply Voltage
5.000 ~ 50.000 MHz*
+5 VDC ± 5%
Power (Warm-Up for 3 minutes)
Power Stabilized at +25ºC (Still air)
Voltage (± 5% Change)
Short Term Aging (3 weeks min operation)
Long Term Aging (After 60 days operation)
Allan Variance (1 sec samples)
Phase Noise (Offset)
10 Hz
100 Hz
1 KHz
10 KHz
Warm-Up to within ± 100 PPB
3 Watts
1 Watt Typical
±0.5 PPB
± 0.5 PPB / Day
± 50 PPB / Year
10^-11 / Sec
(Typical @ 10 MHz)
-120 dBc
-140 dBc
-155 dBc
-158 dBc
(Referenced to freq after 1/2 hour power on)
Frequency Adjust (0 to +5 VDC)
Slope
Non-Linearity (0.8V-5.0V)
Input Impedance
Output (@ 10 MHz)
3 minutes
± 0.5 PPM Min.
Positive
± 10%
> 100 K
HCMOS
(Vol)
(Voh)
Rise Time (10% ~ 90% Vdd) (Tr)
10% Vdd
90% Vdd Min
5 nS
Fall Time (90% ~ 10% Vdd) (Tf)
5 nS
Duty Cycle @ 50% Vdd
50% ± 5%
Resonator Type
Coldweld, SC Cut
All specifications subject to change without notice.
*Specifications are applicable to 10 MHz units. Performance at other frequencies will vary
from these values. Other frequencies and performance is available.
Contact Fox Custom Products Center (CPC) for details at 877-369-8041 or
email at http://www.foxonline.com/email.htm
Unless otherwise specified, tolerances are ±0.26
All dimensions are in millimeters.
Pin Connections
#1) Trim
#2) N.C or trim reference Voltage
#3) Output
#4) GND / Case
#5) VDD
Case Material: Steel
Plating: Nickel
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX [phone] http://www.foxonline.com
EMEA Tel/Fax: [phone] | Asia Hong Kong Tel: [phone] Fax [phone] | Taiwan Tel: [phone] Fax [phone] | Japan Tel: [phone] Fax: [phone]
© 2006 FOX ELECTRONICS | ISO9001:2000 Certified