FOX923 Datasheet, PDF (1/1 Pages) Fox Electronics – 3.0V Surface Mount TCXO/VCTCXO

3.0V Surface Mount TCXO/VCTCXO
MODEL: FOX923 SERIES
FEATURES
• 3.0V Operation
• 1.0 mm Max Height
• Clipped SINE Output
• Low Cost
• Tape and Reel
OPTIONS
• Voltage Control (FOX923E)
• Voltages of 2.8V ~ 3.3V
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Part Number
673-Frequency-xxxxx
638-Frequency-xxxxx
Model
Number
FOX923B
FOX923E
Frequency
Stability
see table
see table
Operating
Temperature
-20 ~ +75 ºC
-20 ~ +75 ºC
Frequency
Range (MHz)
8.000 ~ 35.000
8.000 ~ 35.000
• ELECTRICAL CHARACTERISTICS
PARAMETERS
MAX (unless otherwise noted)
Frequency Range (FO)
8.000 ~ 35.000 MHz
Initial Frequency Tolerance @ 25ºC
± 1.0PPM
(FOX923E: VC = 1.5V¹)
Frequency Stability²
Over Temperature Range
± 2.5PPM
Over Supply Voltage Change (3.0V ± 5%)
± 0.2PPM
Over Load Change (10KΩ//10pF) ±10%
± 0.2PPM
Temperature Range
Operating
(TOPR)
-20 ~ +75ºC
Storage
(TSTG)
-40 ~ +85ºC
Supply Voltage³ (VDD)
3.0V ± 5%
Input Current (IDD)
2.0mA
Output Waveform (Clipped Sine)
Peak-to-Peak Level (Vp-p)
0.8V MIN
Aging @ 25ºC; per year
± 1.0PPM
Pullability¹ (Vc = 1.5V ± 1.0V)
±5PPM MIN, ±15PPM MAX
Maximum Soldering Temp / Time
260ºC / 10 Seconds*
Moisture Sensitivity Level (MSL)
1
Termination Finish
Au
1_{For proper operation, a control Voltage (Vc) must be applied to pin 1 on VCTCXO's.}
2_{Other stabilities/temperature ranges available.}
3_{Other voltages available.}
All specifications subject to change without notice. Rev. 7/26/05
Learn more about:
Part Marking Identification
Tape and Reel Specification
Internet required
All dimensions are in millimeters.
Pin Connections
FOX923B
#1 NC #3 Output
#2 GND #4 Vdd
FOX923E
#1 Vc
#3 Output
#2 GND #4 Vdd
FOX Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239) 693.0099 FAX [phone] http://www.foxonline.com
EMEA Munich, Germany +49 0 89.90936870 FAX [phone] | Asia Hong Kong +852.2854.4285 FAX [phone]
93
© 2005 FOX ELECTRONICS