FOX801 Datasheet, PDF (1/1 Pages) Fox Electronics – 3.0V/5.0V LOW PROFILE TCXO

3.0V/5.0V LOW PROFILE TCXO
MODEL: FOX801 SERIES
FEATURES
OPTIONS
• 2.0mm Height Max
• 'A' Version - 5.0V
• Low Cost
• 'B' Version - 3.0V
• Clipped Sine Output
• VCTCXO - AE/BE Version
• Tape and Reel (2,000 pcs. STD) • VCTCXO - AH/BH Version
(trimmerless)
Discontinued Learn more about:
Part Marking Identification
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Tape and Reel Specification
Internet required
Part Number
Model Frequency Operating
Frequency
Number Stability Temperature (ºC) Range (MHz)
250-Frequency-xxxxx FOX801A see table
-30 ~ +75 10.000 ~ 50.000
251-Frequency-xxxxx FOX801AE see table
-30 ~ +75 10.000 ~ 50.000
252-Frequency-xxxxx FOX801AH see table
-30 ~ +75 10.000 ~ 50.000
253-Frequency-xxxxx FOX801B see table
-30 ~ +75 10.000 ~ 50.000
254-Frequency-xxxxx FOX801BE see table
-30 ~ +75 10.000 ~ 50.000
255-Frequency-xxxxx FOX801BH see table
-30 ~ +75 10.000 ~ 50.000
• ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency Range (FO)
Temperature Range
Operating
(TOPR)
Storage
(TSTG)
Initial Frequency Tolerance (@25ºC)
Vc = 2.5V (A Series)¹ FOX801A/B/AE/BE
Vc = 1.5V (B Series)¹ FOX801AH/BH
Supply Voltage (VDD)
A Version
B Version
Input Current
(IDD)
Frequency Stability
Over Temperature Range
Over Supply Voltage Change (VDD ± 5%)
Over Load Change (10Ω ± 10% // 10pF ± 10%)
Output Waveform (Clipped Sine)
Peak-to-Peak Level (Vp-p)
A Version: 10.000 ~ 15.999 MHz
A Version: 16.000 ~ 50.000 MHz
B Version: 10.000 ~ 15.999 MHz
B Version: 16.000 ~ 50.000 MHz
Output Load
Frequency Adjustment (Internal Trimmer)
FOX801A/B/AE/BE
FOX801AH/BH
Voltage Control Option (VCTCXO)¹
A Version (Vc=2.5±2.0V) FOX801A/B
B Version (Vc=1.5±1.0V) FOX801AE/BE
FOX801AH/BH
Aging per year
MAX (unless otherwise noted)
10.000 ~ 50.000 MHz
-30ºC ~ +75ºC
-35ºC ~ +80ºC
±0.5PPM
±2.0PPM
5.0V ± 5%
3.0V ± 5%
2.0mA
±2.5PPM
±0.3PPM
±0.3PPM
1.0V Min
0.8V Min
0.8V Min
0.7V Min
10KΩ // 10pF
±3.0PPM
Trimmerless
None
±5.0PPM Min
±8.0PPM Min
±0.8PPM
1 _{For proper operation, a control voltage (Vc) must be applied to pin 1 on VCTCXOs.}
All specifications subject to change without notice. Rev. 6/1/04
All dimensions are in millimeters.
88 FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA [phone] FAX [phone] http://www.foxonline.com
© 2004 FOX ELECTRONICS