FA4100 Datasheet, PDF (1/2 Pages) Fox Electronics – 3.3V HCMOS Automotive Grade SMD Oscillator

3.3V HCMOS Automotive Grade SMD Oscillator
Model: FA4100 SERIES
Page 1 of 2
RoHS Compliant / Pb Free / REACH Compliant
Rev. 2/27/2012
http://www.foxonline.com/need_a_sample.htm
FEATURES
• AEC-Q200 Qualified
• TS-16949 Certified
• Temperature range from -40ºC ~ +125ºC
• Seam Seal
• Tape and Reel (2,000 pcs. STD)
• PART NUMBER SELECTION
Part Number
Model _Frequency
Operating
Frequency
Number _Stability¹ _{Temperature (ºC) Range (MHz)}
117B-Frequency-xxxxx FA4100R ±100PPM
-40 ~ +85 2.000 ~ 135.000
116B-Frequency-xxxxx FA4100
125B-Frequency-xxxxx FA4105R
124B-Frequency-xxxxx FA4105
126B-Frequency-xxxxx FA4106R
±100PPM
±50PPM
±50PPM
±25PPM
-40 ~ +125
-40 ~ +85
-40 ~ +125
-40 ~ +85
2.000 ~ 48.000
2.000 ~ 135.000
2.000 ~ 48.000
2.000 ~ 135.000
7.1 Max
#4
#1
#3
5.1 Max
#2
• ELECTRICAL CHARACTERISTICS
1.4 Max
PARAMETERS
Frequency Range (Fo)
Storage Temperature Range (Tstg)
Supply Voltage (Vdd)
Input Current
(Idd)
2.000 ~ 19.999999 MHz
20.000 ~ 31.999999 MHz
32.000 ~ 49.999999 MHz
50.000 ~ 79.999999 MHz
80.000 ~ 99.999999 MHz
100.000 ~ 135.000 MHz
Output Symmetry (50% Vdd)
Rise/Fall Time (10% ~ 90% Vdd Levels)
2.000 ~ 49.999999 MHz
50.000 ~ 79.999999 MHz
80.000 ~ 99.999999 MHz
100.000 ~ 135.000 MHz
Output Voltage (Vol)

(Voh)
Output Current (Iol)

(Ioh)
Output Load
(HCMOS)
Standby Current (Ist)
Start-up Time (Ts)
Output Disable Time ²
Output Enable Time ²
Aging (per year @25C)
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
MAX (unless otherwise noted)
see chart above
-55ºC ~ +150ºC
3.3V ±10%
7mA
12mA
20mA
25mA
30mA
40mA
40% ~ 60%³
10nS
8nS
5nS
4nS
10% Vdd
90% Vdd Min
2mA Min
-2mA Min
15pF
10µA
10mS
100nS
10mS
±5 PPM
260ºC / 10 Seconds
1
Au
1 _{Inclusive of 25ºC tolerance, operating temperature range.}
2 _{An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.}
3 _{45/55 symmetry available on an inquiry basis.}
Notes: A 0.01µF bypass capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may
vary. All specifications subject to change without notice.
1.4
#1
#4
#2 _2.6
#3
5.08
R ec ommended
S older Pad Layout
1.8
2.0
#1
4.2
5.08
Pin C onnec tions
#1 E/D #3 Output
#2 GnD #4 VDD
All dimensions are in millimeters
• Enable / Disable Function
(Pin 1)
OPEN ²
OUTPUT (Pin 3)
ACTIVE
'1' Level Vih ≥ 80% Vdd
'0' Level Vil ≤ 20% Vdd
ACTIVE
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX [phone] www.foxonline.com
EMEA Tel: [phone] | Canada +1.888.438.2369 | Asia Hong Kong Tel: [phone] | Japan Tel: [phone]
© 2012 FOX ELECTRONICS | ISO9001:2008 Certified