F547F549 Datasheet, PDF (1/2 Pages) Fox Electronics – HCMOS 5x3.2mm 2.5V SMD Oscillator

HCMOS 5x3.2mm 2.5V SMD Oscillator
Model: F547 / F549 SERIES
Page 1 of 2
RoHS Compliant / Pb Free
Rev. 1/21/2009
http://www.foxonline.com/need_a_sample.htm
FEATURES
• 2.5V Operation
• HCMOS Output
• Low Power Consumption
• Tape and Reel (1,000 pcs. STD)
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Part Number
Model Frequency
Number Stability¹
809A-Frequency-xxxxx _F547F ±15PPM
809C-Frequency-xxxxx _F547R ±15PPM
810A-Frequency-xxxxx _F549F ±10PPM
810C-Frequency-xxxxx _F549R ±10PPM
813A-Frequency-xxxxx _F54S ±8PPM
813C-Frequency-xxxxx _F54SR ±8PPM
Operating
Temperature (ºC)
-20 ~ +70
-40 ~ +85
-20 ~ +70
-40 ~ +85
-20 ~ +70
-40 ~ +85
Frequency
Range (MHz)
4.000 - 54.000
4.000 - 54.000
4.000 - 54.000
4.000 - 54.000
4.000 - 54.000
4.000 - 54.000
5 . 0 ±0 .2
#4
#3
3 . 2 ±0 .2
#1
#2
• ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency Range (FO)
Storage Temperature Range (TSTG)
Supply Voltage (VDD)
Input Current
(IDD)
Output Symmetry (50% VDD)
Rise Time (10% ~ 90% VDD) (TR)
Fall Time (90% ~ 10% VDD) (TF)
Output Voltage (VOL)

(VOH)
Output Current (IOL)

(IOH)
Output Load
(HCMOS)
Standby Current
Start-up Time (TS)
Output Disable Time ²
Output Enable Time ²
Phase Noise
Period Jitter
Maximum Soldering Temp / Time
Moisture Sensitivity Level (MSL)
Termination Finish
MAX (unless otherwise noted)
4.000 ~ 54.000 MHz
-40ºC ~ +85ºC
2.5V ± 5%
7mA
45% ~ 55%
5nS
5nS
10% VDD
90% VDD Min
4mA Min
-4mA Min
15pF
10µA
10mS
100nS
10mS
-140Bc/Hz Typ. @ 10kHz offset
3pS RMS Typ.
260ºC / 10 Seconds
1
Au
1 _{Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, reflow,}
and one year aging.
2 _{An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.}
Notes:
*A 0.01µF capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
*Dimensional drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary.
All specifications subject to change without notice.
1 . 0 5 ±0 .1
#1
#2
Test Points.
No Connect.
1.6
#4
#3 _0.7
2.6 1.1
Recommended
Solder Pad Layout
1.6
1.0
2.6 1.3
All dimensions are in millimeters.
Pin Connection
#1 E/D #3 Output
#2 GND #4 Vdd
• Enable / Disable Function
Pin 1
OPEN
'1' Level VIH ≥ 70% VDD
'0' Level VIL ≤ 30% VDD
OUTPUT (Pin 3)
ACTIVE
ACTIVE
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX [phone] http://www.foxonline.com
EMEA Tel/Fax: [phone] | Asia Hong Kong Tel: [phone] Fax [phone] | Japan Tel: [phone] Fax: [phone]
© 2009 FOX ELECTRONICS | ISO9001:2000 Certified