F4105-200 Datasheet, PDF (1/2 Pages) Fox Electronics – 3.3V, HCMOS , SMD Oscillator

3.3V, HCMOS, SMD Oscillator
Model: F4100 SERIES
Page 1 of 2
RoHS Compliant / Pb Free
Rev. 1/16/2014
http://www.foxonline.com/need_a_sample.htm
• PART NUMBER SELECTION
Part Number
116-Frequency-xxxxx
117-Frequency-xxxxx
124-Frequency-xxxxx
125-Frequency-xxxxx
126-Frequency-xxxxx
127-Frequency-xxxxx
128-Frequency-xxxxx
Model
Number
F4100
F4100R
F4105
F4105R
F4106
F4106R
F4108
Frequency
Stability¹
±100PPM
±100PPM
±50PPM
±50PPM
±25PPM
±25PPM*
±20PPM*
Operating
Temperature (ºC)
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
• ELECTRICAL CHARACTERISTICS
Frequency
Range (MHz)
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 165.000
0.012 ~ 156.520
0.012 ~ 162.000
PARAMETERS
MAX (unless otherwise noted)
Frequency Range (Fo)
0.012 ~ 170.000 MHz
Storage Temperature Range (Tstg)
-55ºC ~ +125ºC
Supply Voltage (Vdd)
3.3V ± 10%
Input Current
(Idd)
0.012 ~ 0.040 MHz
3mA
0.040+ ~ 1.500 MHz
6mA
1.500+ ~ 32.000 MHz
15mA
32.000+ ~ 50.000 MHz
20mA
50.000+ ~ 67.000 MHz
25mA
67.000+ ~ 170.000 MHz
40mA
Output Symmetry (50% Vdd)
0.012 ~ 50.000 MHz
45% ~ 55%
50.000+ ~ 170.000 MHz
40% ~ 60%
Rise Time (10% ~ 90% Vdd) (Tr)
0.012 ~ 80.000 MHz
6nS
80.000+ ~ 125.000 MHz
4nS
125.000+ ~ 170.000 MHz
3nS
Fall Time(90% ~ 10% Vdd) (Tf)
0.012 ~ 80.000 MHz
6nS
80.000+ ~ 125.000 MHz
4nS
125.000+ ~ 170.000 MHz
3nS
Output Voltage (Vol)
10% Vdd
(Voh)
90% VddMin
Output Current (Iol)
2mAMin
(Ioh)
-2mAMin
Output Load
(HCMOS)
15pF
Standby Current
10µA
Start-up Time (Ts)
0.012 ~ 32.000 MHz
5mS
32.000+ ~ 170.000 MHz
Output Disable Time ²
Output Enable Time ²
10mS
150nS
_{0.012 ~ 32.000 MHz}
5mS
32.000+ ~ 170.000 MHz
Jitter (FO ≥ 100MHz)
10mS
12kHz ~ 20MHz
0.3pS Typ.
RMS Period
2.5pS Typ.
Cycle-to-Cycle
20pS Typ.
1 _{Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,}
shock, and vibration. *Excludes Shock/Vibration
2 _{An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.}
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise. Drawing is for reference to critical specifications defined by
size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary.
All specifications subject to change without notice.
XpressO^® Equivalent
FXO-HC73
Why XpressO?
Lower Cost, Faster Delivery, Low Jitter!
7.5 Max
#4
Top
View
#1
Dot denotes
pin 1
#3
5.2 Max
#2
1.5 Max
1.4±0.2
Bottom ^#1
View
#4
#2
#3
2.6±0.2
5.08±0.1
Recommended
Solder Pad Layout
1.8±0.1
2.0±0.1
4.2±0.1
5.08±0.1
Pin Connections
#1 E/D #3 output
#2 GnD #4 VDD
All dimensions are in millimeters
• Enable / Disable Function ²
INH (Pin 1)
OPEN ²
OUTPUT (Pin 3)
ACTIVE
'1' Level Vih ≥ 70% Vdd
ACTIVE
'0' Level Vil ≤ 30% Vdd
High Z
Fox Electronics
5570 Enterprise Parkway
Fort Myers, Florida 33905
An Integrated Device Technology, Inc. company
USA +1.239.693.0099
FOXonline.com
FAX [phone]