F4100-500 Datasheet, PDF (1/2 Pages) Fox Electronics – 3.3V, HCMOS, SMD Oscillator

3.3V, HCMOS, SMD Oscillator
Model: F4100 SERIES
RoHS Compliant / Pb Free
Page 1 of 2
XpressO^® Equivalent
FXO-HC73
Why XpressO?
Lower Cost, Faster Delivery, Low Jitter!
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Part Number
116-Frequency-xxxxx
117-Frequency-xxxxx
124-Frequency-xxxxx
125-Frequency-xxxxx
126-Frequency-xxxxx
127-Frequency-xxxxx
128-Frequency-xxxxx
Model
Number
F4100
F4100R
F4105
F4105R
F4106
F4106R
F4108
Frequency
Stability¹
±100PPM
±100PPM
±50PPM
±50PPM
±25PPM
±25PPM*
±20PPM*
Operating
Temperature (ºC)
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
-40 ~ +85
-10 ~ +70
• ELECTRICAL CHARACTERISTICS
Frequency
Range (MHz)
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 170.000
0.012 ~ 165.000
0.012 ~ 156.520
0.012 ~ 162.000
Rev. 2/26/2008
http://www.foxonline.com/need_a_sample.htm
PARAMETERS
MAX (unless otherwise noted)
Frequency Range (Fo)
0.012 ~ 170.000 MHz
Storage Temperature Range (Tstg)
-55ºC ~ +125ºC
Supply Voltage (Vdd)
3.3V ± 10%
Input Current
(Idd)
0.012 ~ 0.040 MHz
3mA
0.040+ ~ 1.500 MHz
6mA
1.500+ ~ 32.000 MHz
15mA
32.000+ ~ 50.000 MHz
20mA
50.000+ ~ 67.000 MHz
25mA
67.000+ ~ 170.000 MHz
40mA
Output Symmetry (50% Vdd)
0.012 ~ 50.000 MHz
45% ~ 55%
50.000+ ~ 170.000 MHz
40% ~ 60%
Rise Time (10% ~ 90% Vdd) (Tr)
0.012 ~ 80.000 MHz
6nS
80.000+ ~ 125.000 MHz
4nS
125.000+ ~ 170.000 MHz
3nS
Fall Time(90% ~ 10% Vdd) (Tf)
0.012 ~ 80.000 MHz
6nS
80.000+ ~ 125.000 MHz
4nS
125.000+ ~ 170.000 MHz
3nS
Output Voltage (Vol)
10% Vdd
(Voh)
90% VddMin
Output Current (Iol)
2mAMin
(Ioh)
-2mAMin
Output Load
(HCMOS)
15pF
Standby Current
10µA
Start-up Time (Ts)
0.012 ~ 32.000 MHz
5mS
32.000+ ~ 170.000 MHz
10mS
Output Disable Time ²
150nS
Output Enable Time ²
_{0.012 ~ 32.000 MHz}
5mS
32.000+ ~ 170.000 MHz
10mS
Jitter
12kHz ~ 20MHz
0.3pS Typ.
RMS Period
2.5pS Typ.
Cycle-to-Cycle
20pS Typ.
1 _{Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,}
shock, and vibration. *Excludes Shock/Vibration
2 _{An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.}
Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
All dimensions are in millimeters.
Drawing is for reference to critical specifications
defined by size measurements.
Certain non-critical visual attributes, such as
side castellations, reference pin shape, etc. may
vary. All specifications subject to change without
notice.
• Enable / Disable Function ²
INH (Pin 1)
OPEN ²
'1' Level Vih ≥ 70% Vdd
'0' Level Vil ≤ 30% Vdd
OUTPUT (Pin 3)
ACTIVE
ACTIVE
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX [phone] http://www.foxonline.com
EMEA Tel/Fax: [phone] | Asia Hong Kong Tel: [phone] Fax [phone] | Japan Tel: [phone] Fax: [phone]
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified