F316R-24.000 Datasheet, PDF (1/2 Pages) Fox Electronics – HCMOS 3.2x2.5mm 1.8V SMD Oscillator

HCMOS 3.2x2.5mm 1.8V SMD Oscillator
Model: F310 Series
Page 1 of 2
RoHS Compliant / Pb Free
Rev. 5/2/2013
http://www.foxonline.com/need_a_sample.htm
FEATURES
• 1.8V Operation
• HCMOS Output
• Low Power Consumption
• Standby Function
• Tape and Reel (2,000 pcs. STD)
PRELIMINARY
• PART NUMBER SELECTION ^{Learn More - Internet Required}
Part Number
665-Frequency-xxxxx
676-Frequency-xxxxx
667-Frequency-xxxxx
758-Frequency-xxxxx
668-Frequency-xxxxx
759-Frequency-xxxxx
Model Frequency Operating
Frequency
Number Stability¹ Temperature (ºC) Range (MHz)
F310 ±100 PPM
-10 ~ +70
1.8432 ~ 50.000
F310R ±100 PPM
-40 ~ +85
1.8432 ~ 50.000
F315 ±50 PPM
-10 ~ +70
1.8432 ~ 50.000
F315R ±50 PPM
-40 ~ +85
1.8432 ~ 50.000
F316 ±25 PPM
-10 ~ +70
1.8432 ~ 50.000
F316R ±25 PPM*
-40 ~ +85
1.8432 ~ 50.000
3.2 ± 0.2
#4 #3
Top
View
2.5 ± 0.2
Dot denotes #1
#2
Pin 1
• ELECTRICAL CHARACTERISTICS
PARAMETERS
Frequency Range (Fo)
Temperature Range (Tstg)
Supply Voltage (Vdd)
Input Current
(Idd)
1.8432 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
Output Symmetry (50% Vdd)
Rise Time (20% ~ 80% Vdd) (Tr)
1.8432 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
Fall Time (80% ~ 20% Vdd) (Tf)
1.8432 ~ 32.100 MHz
32.100+ ~ 50.000 MHz
Output Voltage (Vol)

(Voh)
Output Current (Iol)

(Ioh)
Output Load
(HCMOS)
Standby Current
Start-up Time (Ts)
Output Disable Time ²
Output Enable Time ²
Maximum Soldering Temp/Time
Moisture Sensitivity Level (MSL)
Termination Finish
MAX (unless otherwise noted)
1.8432 ~ 50.000 MHz
-55ºC ~ +125ºC
1.8V ± 5%
7mA
15mA
40% ~ 60%
5nS
3.5nS
5nS
3.5nS
20% Vdd
80% Vdd Min
2mA Min
-2mA Min
15pF
10µA
10mS
300nS
10mS
260ºC / 10 Seconds
1
Au
1 _{Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging,}
shock, and vibration. *Excludes Shock/Vibration
2 _{An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open.}
Note: A 0.01µF bypass capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to
minimize power supply line noise.
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary.
All specifications subject to change without notice.
1.2 Max
1.2
Bottom ^#1
View
#4
#2
0.7
#3 0.8
0.9
Recommended
Solder Pad Layout
1.4
1.2
0.5
#1
1.0
All dimensions are in millimeters.
Pin Connections
#1 E/D
#2 GnD
#3 output
#4 V DD
• Enable / Disable Function
INH (Pin 1)
OUTPUT (Pin 3)
OPEN ²
ACTIVE
'1' Level Vih ≥ 70% Vdd
ACTIVE
'0' Level Vil ≤ 30% Vdd
High Z
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX [phone] www.foxonline.com
EMEA Tel: [phone] | Canada +1.888.438.2369 | Asia Hong Kong Tel: [phone] | Japan Tel: [phone]
© 2013 FOX ELECTRONICS | An Integrated Device Technology, Inc. company | ISO9001:2008 Certified