FYLS-0603BURC-5 Datasheet, PDF (3/5 Pages) Ningbo Foryard Optoelectronics Co., Ltd. – LED LAMP

LED LAMP
‹ Precautions For Use
1.Suggest the LEDs should be kept between 5℃ and 30℃and 60%RH or less before
opening the package, The max. storage period before opening the package is 1 year.
2. After opening the package, the LEDs should be kept at 30℃/35%RH or less, and it
should be used within3 hours. In the event of incomplete usage, it is advised that user
preheat the remaining devices at 60±5℃ for 8 hours prior to use.
3. Reflow soldering should not be done more than twice. When soldering, don’t tress on
LEDs during heating. After soldering, don’t warp the circuit board.
4. Repair should not be done after the LEDs have been soldered. When repair is
unavoidable, Double-head soldering iron should be used. It should be confirmed
beforehand whether the characteristics of the LEDs will be damaged by repair or not.
‹ Soldering Iron:
z Temperature at tip of iron:300 ゜с Max.(25W Max)
z Soldering time: 3±1sec.
‹ Reflow Temp./Time:
Please refer to the following figure：