EF1605CT Datasheet, PDF (2/6 Pages) Frontier Electronics. – 16.0A GLASS PASSIVATED EFFICIENCY FAST RECTIFIERS-50-600V

Effciency Fast Rectifiers
EF1605CT THRU EF1660CT
Formosa MS
16.0A Glass Passivated
Effcienct Fast Rectifiers-50-600V
Features
• Reverse recovery time less than 25ns
• Dual rectifier construction, positive centetap, offers 8.0A
half wave and16.0A full wave rectification.
• High current capability.
• Low reverse leakage current.
• High surge capability.
• Glass passivated chip junction.
• Low forward drop down voltage.
• High reliability.
• Lead-free parts meet RoHS requirments.
• Suffix "-H" indicates Halogen-free parts, ex. ΕF1605CT-H
Package outline
TO-220AB
0.419(10.66)
0.387(9.85)
0.269(6.85)
0.226(5.75)
0.139(3.55)
MIN
123
0.196(5.00)
0.163(4.16)
0.054(1.39)
0.045(1.15)
0.624(15.87)
0.548(13.93)
Mechanical data
0.177(4.50)MAX
• Epoxy : UL94-V0 rated flame retardant
• Case : JEDEC TO-220AB molded plastic body over
passivated chip
• Lead : Axial leads, solderable per MIL-STD-202,
Method 208 guranteed
• Polarity: As marked
• Mounting Position : Any
• Weight : Approximated 2.10gram
Maximum ratings (AT T_A=25^oC unless otherwise noted)
PARAMETER
SYMBOLS EF1605CT
0.038(0.96)
0.019(0.50)
0.50(12.70)MIN
0.1(2.54)
0.025(0.65)MAX
PIN 1
PIN 3
PIN 2
Dimensions in inches and (millimeters)
EF1610CT EF1620CT EF1640CT EF1660CT _UNIT
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
V
Maximum RMS voltage
VRMS
35
70
140
280
420
V
Maximum DC blocking voltage
VDC
50
100
200
400
600
V
Maximum average forward rectified current
IO
16.0
A
Peak forward surge current 8.3ms
single half sine-wave(JEDEC method)
IFSM
Typical diode junction capacitance (Note 1)
CJ
Operating junction temperature range
TJ
Storage temperature range
TSTG
100
A
30
pF
-55 to +150
°C
-65 to +175
°C
Electrical characteristics (AT T_A=25^oC unless otherwise noted)
PARAMETER
SYMBOLS EF1605CT EF1610CT EF1620CT _EF1640CT EF1660CT _UNIT
Maximum forward voltage per leg at IF=8.0A
VF
0.98
1.30
1.75
V
Maximum DC reverse current
at TJ =25°C
at rated DC blocking voltage per leg at TJ =125°C
IR
5.0
uA
250
uA
Maximum reverse recovery time per leg (Note 2)
trr
25
ns
Thermal characteristics
PARAMETER
SYMBOLS EF1605CT EF1610CT EF1620CT _EF1640CT EF1660CT _UNIT
Typical thermal resistance junction to case per leg
RθJC
2.0
°C/W
Note 1: Measure at 1 MHz and applied reverse voltage of 4.0 V D.C.
Note 2: Reverse recovery time test condition, IF=0.5A, IR=1.0A, IRR=0.25A
http://www.formosams.com/
TEL:[phone]
FAX:[phone]
Page 2
Document ID Issued Date
DS-222520 2009/02/10
Revised Date Revision
2015/07/06
D
Page.
6