5KP Datasheet, PDF (1/4 Pages) Surge Components – GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 to 110 Volts

DATA SHEET
5KP SERIES
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE 5.0 to 220 Volts PEAK PULSE POWER 5000 Watts ^P-600
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• 5000W Peak Pulse Power capability at on 10/1000µs waveform
• Excellent clamping capability
• Low zener impedance
• Repetition rate(Duty Cycle):.05%
• Fast response time: typically less than 1.0 ps from 0 volts to BV min
• Typical IR less than 1µA above 10V
Unit: inch(mm)
.052(1.3)
.048(1.2)
MECHANICAL DATA
Case: JEDEC P-600 molded plastic
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denoted cathode except Bipolar
Mounting Position: Any
Weight: 0.07 ounce, 2.1 gram
.360(9.1)
.340(8.6)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types 5KP5.0 thru types 5KP220
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
Rating
Symbol
Peak Power Dissipation at TA =25^OC, T P=1ms(Note 1)
Steady State Power dissipation at TL = 7 5 ^OC
Lead Lengths .375", (95mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JECED Method) (Note 3)
Operating Junction and Storage Temperature Range
PPK
PD
I FSM
TJ,TSTG
Value
5000
8.0
400
-55 to +175
Units
Watts
Watts
Amps
O_C
NOTES:
1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25°Cper Fig. 2.
2.Mounted on Copper Leaf area of 0.79in²(20mm²).
3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
STAD-NOV.11.2003
PAGE . 1