FWLF1621P2T Datasheet, PDF (5/11 Pages) Finisar Corporation. – Multi-rate CWDM Pluggable SFP Transceiver

FWLF1621P2Txx SFP Product Specification – April 2012
Finisar
V. Optical Characteristics (T_OP = -40 to 85 C, V_CC = 3.1 to 3.5 Volts)
Parameter
Symbol Min
Typ
Transmitter
Output Opt. Pwr (EOL)
Optical Wavelength
P_OUT
0
(X-6.5) (X)
Wavelength Temperature Dependence
0.08
Spectral Width
Optical Extinction Ratio
ER
8.2
Sidemode Suppression Ratio
Optical Rise/Fall Time
RIN
SMSR_min
30
t_r/ t_f
RIN
Transmitter Jitter Generation
Dispersion Penalty at 80 km
Optical Return Loss
24
Receiver
Optical Input Power
Optical Input Wavelength
Receiver Jitter Generation
P_in
-27
C
1450
Optical Return Loss
27
Max
+5
(X+6.5)
0.125
1
180
-120
75
2.0
-7
1620
75
Unit Ref.
dBm 2
nm 3
nm/°C
nm 4
dB 5
dB
ps 6
dB/Hz
mUI 7
dB 8
dB
dBm 9
nm
mUI 7
dB
Notes:
1. Parameters are specified over temperature and voltage, at end of life unless otherwise noted.
2. Class 1 Laser Safety per FDA/CDRH and IEC-825-1 regulations.
3. Over case temperature of -40 to 85 °C. The Transmitter Center Wavelength “X” is as specified by the
customer. The current available wavelengths are: 1471, 1491, 1511, 1531, 1551, 1571, 1591, and 1611
nm. Please see the “Product Selection” section on page 1.
4. Full width, -20dB from peak.
5. Measured filtered, at 2.488 Gb/s. Min represents worst-case ER over temperature and at end of life.
6. Unfiltered, 20% to 80%.
7. Measured per GR-253² section 5.6 for OC-48 B.
8. SMF-28 fiber used. 60kms represents 1200ps/nm at 1610nm. Measured at 2.488Gb/s with a PRBS
2²³-1 pattern at a BER<10^-12.
9. P_in represents the range of input powers where BER<10^-12. P_in is valid over all data rates specified in
Section VI.
Finisar Corporation April 2012 Rev.C
Page 5