FWLF15197D47 Datasheet, PDF (4/12 Pages) Finisar Corporation. – CWDM RoHS Compliant Pluggable SFP Transceiver

FWLF15197Dxx SFP Product Specification – October 2006
Finisar
IV. Low Speed Signals
Parameter
RX_LOS Assert Level
RX_LOS Deassert Level
RX_LOS Hysteresis
RX_LOS Assert Delay
RX_LOS Negate Delay
TX_DISABLE Assert Time
TX_DISABLE Negate Time
TX_DISABLE Reset Time
TX_FAULT Assert
Initialization Time
Symbol Min Typ
-30
0.5 2
t_loss_on
t_loss_off
t_off
t_on
t_reset 10
Max
-19
100
100
10
1000
100
300
Units Notes/Conditions
dBm
dBm
dB
μsec From detection of loss of signal
to assertion of RX_LOS
μsec From detection of presence of
signal to negation of RX_LOS
μsec Rising edge of TX_DISABLE to
fall of output signal below 10%
of nominal
μsec Falling edge of TX_DISABLE
to rise of output signal above
90% of nominal. Time
indicated is under steady-state
temperature conditions.
μsec TX_DISABLE HIGH before
TX_DISABLE set LOW
μsec From fault to assertion of
TX_FAULT
msec From power on to negation of
TX_FAULT using
TX_DISABLE
© Finisar Corporation October 2006 Rev.B
Page 4