XPRV2021A Datasheet, PDF (2/5 Pages) Finisar Corporation. – 43 Gb/s High Bandwidth Photoreceiver

43 Gb/s High Bandwidth Photoreceiver – April 2014
I. Pin Description
# Pin
Symbol
1,3,16
N/C
2,4,5,6,11,13,15 GND
7,8,9,10
RFU
12
V_CC
14
V_PD
17
out
II. Block Diagram
Description
not connected
ground
reserved for future use - please do not connect
amplifier supply
photodiode supply
inverting RF output, V® connector
III. Absolute Maximum Ratings
Parameter
Photodiode Bias Voltage
Amplifier Supply Voltage
Maximum Average Optical Input
Power
Electro Static Discharge
Fiber Bend Radius
Symbol
V_PD
VCC
Condition
V_CC= Min to Max
V_PD= 2 V to Max
P_opt
NRZ
C= 100 pF, R= 1.5 kΩ
VESD
HBM
Min.
2
0
-250
16
Typ.
Max. Unit
4
V
4
V
6 dBm
250 V
mm
Notice
Stresses greater than those listed under “Absolute Maximum Ratings” may
cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or any other conditions above
those indicated in the operations section for extended periods of time
may affect reliability.
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage and/or
degradation to equipment, take normal ESD precautions when handling
this product.
Confidential and Proprietary © 2014 Finisar Corporation. All rights reserved
Rev. A1 Page 2