DFB-1310-4I-LC Datasheet, PDF (2/5 Pages) Finisar Corporation. – DFB LASER DIODE LC TOSA

DFB-1310-4X-LC DFB LC LASER DIODE
ABSOLUTE MAXIMUM RATINGS
Parameter
Storage Temperature
Rating
-40°C to +85°C
Case Operating Temperature
-40°C to +85°C
Lead Solder Temperature
Reverse Power Supply Voltage
260°C, 10 seconds
5V
Peak Forward Continuous Current
100mA
ESD Exposure (Human Body Model)
200V¹
1_{Heel and wrist straps must be used on a properly grounded worksatation}
NOTICE: Stresses greater than those listed under “Absolute
Maximum Ratings” may cause permanent damage to the
device. This is a stress rating only and functional operation
of the device at these or any other conditions above those
indicated in the operations section for extended periods of
time may affect reliability.
NOTICE: The inherent design of this component causes it
to be sensitive to electrostatic discharge (ESD). To prevent
ESD-induced damage and/or degradation to equipment, take
normal ESD precautions when handling this product