FTRX-3811-317 Datasheet, PDF (1/13 Pages) Finisar Corporation. – 10Gb/s DWDM 80km XFP Optical Transceiver

Finisar
Product Specification
10Gb/s DWDM 80km XFP Optical Transceiver
FTRX-3811-3xx
PRODUCT FEATURES
• Supports 9.95Gb/s to 10.7Gb/s
bit rates
• Hot-pluggable XFP footprint
• Maximum link length of 80km
• Temperature-stabilized DWDM-
rated EML transmitter
• 100GHz ITU Grid, C-Band
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range: -5°C to 70°C
APPLICATIONS
• DWDM 10Gb/s SONET/SDH
ITU-T G.698.1 S-D100S1-2D
• DWDM 80km 10G Ethernet
• DWDM 80km 10G Fibre Channel
Finisar’s 80km FTRX-3811-3xx Small Form Factor 10Gb/s (XFP) transceivers comply
with the current XFP Multi-Source Agreement (MSA) Specification¹. They exceed the
requirements for DWDM 10Gb/s SONET/SDH interfaces per ITU-T G.698.1 S-D100S1-
2D, and support DWDM 10-Gigabit Ethernet and 10-Gigabit Fibre Channel applications.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in the
XFP MSA.
PRODUCT SELECTION
FTRX-3811-3xx
xx: 100GHz ITU-T channel
(see next page)
© Finisar Corporation 28-September-2007
Rev C1
Page 1