FTLX8574D3BNL Datasheet, PDF (1/12 Pages) Finisar Corporation. – ExtendedTemperature 10Gb/s 850nm SFP+ Datacom Transceiver

Product Specification
Extended Temperature 10Gb/s 850nm SFP+ Datacom Transceiver
FTLX8574D3BNL
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 Supports 9.95 to 10.5 Gb/s bit
rates*
 Power dissipation < 1W
 RoHS-6 compliant (lead-free)
 Commercial temperature range
-5°C to 85°C
 Single 3.3Vpower supply
 Maximum link length of 400m on
OM4 MMF
 Uncooled 850nm VCSEL laser
 Receiver limiting electrical
interface
 Duplex LC connector
 Built-in digital diagnostic functions
APPLICATIONS
 10GBASE-SR/SW 10G Ethernet
 1200-Mx-SN-I 10G Fibre Channel
Finisar’s FTLX8574D3BNL Extended Temperature 10Gb/s SFP+ transceivers are
designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant
with SFF-8431¹, SFF-8432², IEEE 802.3-2012 10GBASE-SR/SW³ and 10G Fibre Channel
1200-Mx-SN-I⁴. Digital diagnostics functions are available via a 2-wire serial interface, as
specified in SFF-8472⁵. The FTLX8574D3BNL is a “limiting module”, i.e., it employs a
limiting receiver. Host board designers using an EDC PHY IC should follow the IC
manufacturer’s recommended settings for interoperating the host-board EDC PHY with a
limiting receiver SFP+ module. The optical transceiver is compliant per the RoHS
Directive 2011/65/EU⁶. See Finisar Application Note AN-2038⁷ for more details.
PRODUCT SELECTION
FTLX8574D3BNL
*Contact Finisar for higher data-rate support up to 11.1Gbps.
 Finisar Corporation - April 2016
Rev. B1
Page 1