FTLX8574D3BCV Datasheet, PDF (1/13 Pages) Finisar Corporation. – 1G/10G 850nmMultimode Datacom SFP+ Transceiver

Product Specification
1G/10G 850nm Multimode Datacom SFP+ Transceiver
FTLX8574D3BCV
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports rate selectable 1.25 Gb/s
or 9.95 to 10.3 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Commercial temperature range
-5°C to 70°C
• Single 3.3V power supply
• Maximum link length of 400m on
OM4 MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical
interface
• Duplex LC connector
• Built-in digital diagnostic functions
.
APPLICATIONS
• 1000BASE-SX 1G Ethernet
• 10GBASE-SR/SW 10G Ethernet
Finisar’s FTLX8574D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use
in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant
with SFF-8431¹, IEEE 802.3-2012 10GBASE-SR/SW² and 1000BASE-SX³. Digital
diagnostics functions are available via a 2-wire serial interface, as specified in SFF-
8472⁴. The FTLX8574D3BCV is a “limiting module”, i.e., it employs a limiting
receiver. Host board designers using an EDC PHY IC should follow the IC
manufacturer’s recommended settings for interoperability with an SFP+ limiting module.
This product is for applications specifically designed for 10G SFP+ ports and 1G/10G
SFP+ ports and not native 1G SFP ports. The optical transceiver is compliant per the
RoHS Directive 2011/65/EU⁵. See Finisar Application Note AN-2038⁶ for more details.
PRODUCT SELECTION
FTLX8574D3BCV
 Finisar Corporation - June 2015
Rev. B
Page 1