FTLX8573D3BTL Datasheet, PDF (1/12 Pages) Finisar Corporation. – RoHS-6 Compliant Industrial Temperature 10Gb/s 850nm Multimode SFP+ Datacom Transceiver

Product Specification
RoHS-6 Compliant
Industrial Temperature 10Gb/s 850nm Multimode
SFP+ Datacom Transceiver
FTLX8573D3BTL
PRODUCT FEATURES
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.5 Gb/s bit rates
Power dissipation < 1W
RoHS-6 compliant (lead-free)
Industrial temperature range
-40°C to 85°C
Single 3.3Vpower supply
Maximum link length of 400m on
4700 MHZ-km OM4 MMF
Heated 850nm VCSEL laser
Receiver limiting electrical
interface
Duplex LC connector
Built-in digital diagnostic functions
APPLICATIONS
10GBASE-SR/SW 10G Ethernet
1200-Mx-SN-I 10G Fibre Channel
Finisar‟s FTLX8573D3BTL Industrial Temperature 10Gb/s SFP+ transceivers are
designed for use in 10-Gigabit Ethernet links over multimode fiber. They are compliant
with SFF-8431¹, SFF-8432², IEEE 802.3ae 10GBASE-SR/SW³ and 10G Fibre Channel
1200-Mx-SN-I⁴. Digital diagnostics functions are available via a 2-wire serial interface,
as specified in SFF-8472⁵. The FTLX8573D3BTL is a “limiting module”, i.e., it employs
a limiting receiver. Host board designers using an EDC PHY IC should follow the IC
manufacturer‟s recommended settings for interoperating the host-board EDC PHY with a
limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per
Directive 2002/95/EC⁶, and Finisar Application Note AN-2038⁷.
PRODUCT SELECTION
FTLX8573D3BTL
Finisar Corporation - April 2013
Rev. B2
Page 1