FTLX8512D3BTL Datasheet, PDF (1/11 Pages) Finisar Corporation. – Industrial Temperature Range 10Gb/s 850nm Multimode Datacom XFP Optical Transceiver

Finisar
Product Specification
Industrial Temperature Range
10Gb/s 850nm Multimode Datacom XFP Optical Transceiver
FTLX8512D3BTL
PRODUCT FEATURES
 Hot-pluggable XFP footprint
 Supports 8.5Gb/s and 9.95 through
10.5 Gb/s bit rates*
 Power dissipation <1.5W
 RoHS-6 compliant (lead-free)
 Temperature range -40°C to +85°C
 Single power supply: 3.3V
 Maximum link length of 300m
 850nm heated VCSEL laser.
 Duplex LC connector
 No Reference Clock required
 Built-in digital diagnostic functions
 Standard bail release mechanism
APPLICATIONS
 10GBASE-SR/SW 10G Ethernet
 1200-Mx-SN-I 10G Fibre Channel
 800-Mx-SN-I 8G Fibre Channel
 G.709 OTN/FEC (OTU1e and OTU2e)
Finisar’s FTLX8512D3BTL Small Form Factor 10Gb/s (XFP) transceivers are compliant
with the current XFP Multi-Source Agreement (MSA) Specification¹ now available with
Industrial Temperature Range of Operation (-40°C to +85°C). They comply with 10-
Gigabit Ethernet 10GBASE-SR/SW per IEEE 802.3ae, 10G Fibre Channel 1200-Mx-SN-
I, 8G Fibre Channel 800-Mx-SN-I, and OTN/FEC protocols OTU1e and OTU2e upon
request. Digital diagnostics functions are available via a 2-wire serial interface, as
specified in the XFP MSA. The transceiver is RoHS compliant and lead free per
Directive 2002/95/EC³, and Finisar Application Note AN-2038⁴.
PRODUCT SELECTION
FTLX8512D3BTL
*Contact Finisar for higher data-rate support
 Finisar Corporation October 2013
Rev. D2
Page 1