|
FTLX6872MCC Datasheet, PDF (1/15 Pages) Finisar Corporation. – 10Gb/s DWDM 80km Multi-Rate Tunable SFP+ Transceiver | |||
|
Product Specification
10Gb/s DWDM 80km Multi-Rate Tunable SFP+ Transceiver
FTLX6871MCC and FTLX6872MCC
PRODUCT FEATURES
⢠Hot-pluggable SFP+ footprint
⢠Supports 8.5 and 9.95 to 11.3 Gb/s
⢠Up to 80km link length
⢠50GHz ITU-based channel spacing
(C-Band) with a wavelength locker
⢠-5 /70°C case temperature range
⢠Single 3.3V power supply
⢠Monolithic MZM Tunable TOSA
⢠Linear or Limiting electrical interface
receiver
⢠Duplex LC connector
⢠Built-in digital diagnostic functions
⢠RoHS-6 compliant (lead-free)
APPLICATIONS
⢠DWDM 80km point to point links:
ï§ 8.5Gb/s Fibre Channel
ï§ 10Gb/s SONET/SDH
ï§ 10G Ethernet
ï§ 10G Fibre Channel
⢠ITU-T G.698.1 DS100S1-2Dz(C)
⢠ITU-T G.709
Finisarâs FTLX6871MCC and FTLX6872MCC transceivers are Enhanced Small Form
Factor Pluggable Tunable SFP+ transceivers designed for use in 10-Gigabit multi-rate
links up to 80km of G.652 single mode fiber. They are compliant with SFF-84311, SFF-
84322 , SFF-86908, and G.698.1 DS100S1-2Dz(C), and support SONET OC-192, SDH
STM-64, 10G Ethernet ZR and 10G Fibre Channel over 80km fiber. Digital diagnostics
functions are available via a 2-wire serial interface, as specified in SFF-84723. The
optical transceiver is compliant per the RoHS Directive 2011/65/EU4. See Finisar
Application Note AN-2038 for more details5.
PRODUCT SELECTION
Product Part Number
FTLX6871MCC
FTLX6872MCC
RX Interface
Linear
Limiting
ï Finisar Corporation October 2015 Rev. B1
Page 1
|
▷ |