FTLX6871MCC Datasheet, PDF (1/13 Pages) Finisar Corporation. – 10GB/S DWDM 80KM MULTI-RATE TUNABLE SFP

Product Specification
10Gb/s DWDM 80km Multi-Rate Tunable SFP+ Transceiver
FTLX6871MCC-xx and FTLX6872MCC-xx
PRODUCT FEATURES
• Hot-pluggable SFP+ footprint
• Supports 8.5 and 9.95 to 11.3 Gb/s
• Up to 80km link length
• 50GHz ITU-based channel spacing
(C-Band) with a wavelength locker
• -5 /70°C case temperature range
• Single 3.3V power supply
• Monolithic MZM Tunable TOSA
• Linear or Limiting electrical interface
receiver
• Duplex LC connector
• Built-in digital diagnostic functions
• RoHS-6 compliant (lead-free)
APPLI CATIONS
• DWDM 80km point to point links:
ƒ 8.5Gb/s Fibre Channel
ƒ 10Gb/s SONET/SDH
ƒ 10G Ethernet
ƒ 10G Fibre Channel
• ITU-T G.698.1 DS100S1-2Dz(C)
• ITU-T G.709
Finisar’s FTLX6871MCC-xx and FTLX6872MCC-xx transceivers are Enhanced Small
Form Factor Pluggable Tunable SFP+ transceivers designed for use in 10-Gigabit multi-
rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431¹,
SFF-8432² , SFF-8690⁸, and G.698.1 DS100S1-2Dz(C), and support SONET OC-192,
SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel over 80km fiber. Digital
diagnostics functions are available via a 2-wire serial interface, as specified in SFF-
8472³. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC⁴, and
Finisar Application Note AN-2038⁵.
PRODUCT SELECTION
Product Part Number
FTLX6871MCC-xx
FTLX6872MCC-xx
RX Interface
Linear
Limiting
© Finisar Corporation - November 2013 Rev. A01
Page 1 of 13