FTLX3871MCCXX Datasheet, PDF (1/14 Pages) Finisar Corporation. – 10Gb/s DWDM 80km Multi-Rate SFP+ Transceiver

Product Specification
10Gb/s DWDM 80km Multi-Rate SFP+ Transceiver
FTLX3871MCCxx
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 Supports 8.5 and 9.95 to 11.3 Gb/s
 Up to 80km link length
 100 GHz channel spacing
 -5 /70°C case temperature range
 Single 3.3V power supply
 Cooled 1550nm EML laser
 Limiting electrical interface receiver
 Duplex LC connector
 Built-in digital diagnostic functions
 RoHS-6 compliant (lead-free)
APPLICATIONS
 DWDM 80km links for:
 Fibre Channel 8.5G and 10G
 10G Ethernet
 10Gb/s SONET/SDH/OTN
 ITU-T G.698.1 DS100S1-2Dz(C)
Finisar’s FTLX3871MCCxx transceivers are Enhanced Small Form Factor Pluggable
SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652
single mode fiber. They are compliant with SFF-8431¹, SFF-8432² and G.698.1
DS100S1-2Dz(C), and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and
10G Fibre Channel over 80km fiber. Finisar’s FTLX3871MCCxx transceivers use
internal retimers (clock and data recovery or CDR) IC’s for both the transmitter and the
receiver. This guarantees compliance with the SONET/SDH jitter requirements, and they
can be used to set the electrical interface XFI-compliant.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472³. The optical transceiver is compliant per the RoHS Directive
2011/65/EU⁴. See Finisar Application Note AN-2038 for more details⁵.
PRODUCT SELECTION
Product Part Number Channel Spacing
FTLX3871MCCxx 100 GHz ITU-T grid
 Finisar Corporation – September 2015
Rev. C1
Page 1