FTLX3813M3 Datasheet, PDF (1/13 Pages) Finisar Corporation. – Multiprotocol, 80km, 10Gb/s DWDM XFP Optical Transceiver

Finisar
Product Specification
Multiprotocol, 80km, 10Gb/s DWDM XFP Optical Transceiver
FTLX3813M3 xx
PRODUCT FEATURES
• Supports 8.5Gb/s to 11.32Gb/s
• Hot-pluggable XFP footprint
• Temperature-stabilized DWDM EML
transmitter
• RoHS-6 Compliant (lead-free)
• 100GHz ITU Grid, C-Band
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• Temperature range: 0°C to 70°C
• Point-to-Point & OSNR optimized
versions
APPL ICATIONS
• ITU G.698.1, DW100S-2Dx, 10Gb/s DWDM
SONET/SDH
• IEEE 10GBASE-ZR based DWDM Ethernet
• 10GFC (SM-1200-LL-L), 8GFC (SM-800-
LC-L), and 10G CPRI
• ITU G.709, OTN/FEC applications including
IEEE OTU1e and OTU2e
Finisar’s FTLX3813M3xx Small Form Factor 10Gb/s (XFP) transceiver complies with the
current XFP Multi-Source Agreement (MSA) Specification, INF-8077i (rev 4.5). It supports
multiple protocols for point-to-point and amplified 10Gb/s DWDM applications with a
maximum link length of 80km. This multi-rate, DWDM XFP transceiver supports clock and data
recovery for 8G Fibre Channel, 10G Fibre Channel, 10G CPRI, 10Gb/s SONET/SDH, 10Gb/s
Ethernet, and OTN/FEC protocols up to 11.32Gb/s. Digital diagnostics functions are available
via a 2-wire serial interface, as specified in the XFP MSA. The transceiver is RoHS compliant
and lead free per Directive 2002/95/EC³, and Finisar Application Note AN-2038⁴.
PRODUCT SELECTION
FTLX3813M3xx
xx: 100GHz ITU channel number
© Finisar Corporation 19-March-2013
Rev. D1
Page 1