|
FTLX3811M317 Datasheet, PDF (1/14 Pages) Finisar Corporation. – RoHS-6 Compliant 10Gb/s DWDM 80km Multi-Rate XFP Optical Transceiver | |||
|
Finisar
Product Specification
RoHS-6 Compliant
10Gb/s DWDM 80km Multi-Rate XFP Optical Transceiver
FTLX3811M3xx
PRODUCT FEATURES
⢠Supports 9.95Gb/s to 11.1Gb/s
bit rates
⢠Hot-pluggable XFP footprint
⢠Maximum link length of 80km
⢠RoHS-6 compliant (lead-free)
⢠Temperature-stabilized DWDM-rated
EML transmitter
⢠100GHz ITU Grid, C-Band
⢠Duplex LC connector
⢠Power dissipation <3.5W
⢠Built-in digital diagnostic functions
⢠Temperature range: -5°C to 70°C
APPLICATIONS
⢠DWDM 10Gb/s SONET/SDH
ITU-T G.698.1 S-D100S1-2D
⢠DWDM 10Gb/s SONET/SDH
ITU-T G.709
⢠DWDM 80km 10G Ethernet
⢠DWDM 80km 10G Fibre Channel
⢠DWDM 80km 10G Ethernet with FEC
Finisarâs 80km FTLX3811M3xx Small Form Factor 10Gb/s (XFP) transceivers comply with the
current XFP Multi-Source Agreement (MSA) Specification1. They exceed the requirements for
DWDM 10Gb/s SONET/SDH interfaces per ITU-T G.698.1 S-D100S1-2D, and support DWDM
10-Gigabit Ethernet, 10-Gigabit Fibre Channel, and 10-Gigabit Ethernet with FEC applications.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in the XFP
MSA. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC3, and Finisar
Application Note AN-20384.
PRODUCT SELECTION
FTLX3811M3xx
xx: 100GHz ITU-T channel (see next page)
© Finisar Corporation 28-September-2007
Rev B2
Page 1
|
▷ |