FTLX2071D327 Datasheet, PDF (1/11 Pages) Finisar Corporation. – RoHS-6 Compliant 10Gb/s 10km Single Mode Bidirectional Datacom SFP+ Transceiver

Product Specification
RoHS-6 Compliant
10Gb/s 10km Single Mode Bidirectional Datacom SFP+ Transceiver
FTLX2071D327/FTLX2071D333
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 Bidirectional 10G over single
strand single mode fiber
 Supports 9.95 to 10.5Gb/s bit rates
 Power dissipation <1W
 RoHS-6 compliant (lead-free)
 Industrial temperature range
-40°C to 85°C
 Single 3.3V power supply
 Maximum link length of 10km
 Uncooled DFB
 Receiver limiting electrical
interface
 Single LC connector
 Built-in digital diagnostic functions
APPLICATIONS
 10GBASE-LR/LW 10G Ethernet
 1200-SM-LL-L 10G Fibre Channel
Finisar’s FTLX2071D327/FTLX2071D333 10Gb/s Enhanced Small Form Factor Pluggable
SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a
single-strand Single Mode fiber. This capability doubles the capacity of installed legacy
single mode fiber links. They are compliant with SFF-8431¹ and IEEE 802.3ae 10GBASE-
LR/LW³, and 10G Fibre Channel 1200-SM-LL-L⁴. Digital diagnostics functions are
available via a 2-wire serial interface, as specified in SFF-8472⁵.
The transceiver is a “limiting module”, i.e., it employs a limiting receiver. Host board
designers using an EDC PHY IC should follow the IC manufacturer’s recommended
settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module.
The optical transceiver is compliant per the RoHS Directive 2011/65/EU⁶. See Finisar
Application Note AN-2038 for more details ⁷.
PRODUCT SELECTION
Part Number
FTLX2071D327
FTLX2071D333
Wavelength
1271 nm
1331 nm
 Finisar Corporation - October 2015
Rev. C1
Page 1