|
FTLX1871M3BNL Datasheet, PDF (1/12 Pages) Finisar Corporation. – 10Gb/s, 80km Single Mode, Multi-Rate SFP+ Transceiver | |||
|
Product Specification
10Gb/s, 80km Single Mode, Multi-Rate SFP+ Transceiver
FTLX1871M3BNL
PRODUCT FEATURES
ï· Hot-pluggable SFP+ footprint
ï· Supports 8.5 and 9.95 to 11.3 Gb/s
ï· 80km link length
ï· 1600ps/nm chromatic dispersion
tolerance
ï· -5/85°C case temperature range
ï· Internal transmitter/receiver CDR
ï· 1.8W/2.0W power consumption
options
ï· Cooled 1550nm EML laser
ï· Limiting electrical interface receiver
ï· Duplex LC connector
ï· Built-in digital diagnostic functions
ï· RoHS-6 compliant (lead-free)
APPLICATIONS
ï· SONET OC-192, SDH STM-64 and
OTN G.959.1 P1L1-2D2
ï· 10G Ethernet ZR and 10G Fibre Channel
ï· OTN G.709 OTU1e/2/2e FEC bit rates
ï· 8.5Gb/s Fibre Channel
Finisarâs FTLX1871M3BNL transceivers are Enhanced Small Form Factor Pluggable
SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652
single mode fiber. They are compliant with SFF-84311, SFF-84322 and G.959.1 P1L1-
2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre
Channel. Finisarâs FTLX1871M3BNL transceivers use internal transmitter and receiver
retimer units (a.k.a. clock data recovery or CDR). This guarantees compliance with the
SONET/SDH jitter requirements and it can be used to set the electrical interface to be
XFI-compliant. Digital diagnostics functions are available via a 2-wire serial interface, as
specified in SFF-84723. The optical transceiver is compliant per the RoHS Directive
2011/65/EU4. See Finisar Application Note AN-2038 for more details5.
PRODUCT SELECTION
FTLX1871M3BNL
ï Finisar Corporation â September 2015
Rev. C1
Page 1
|
▷ |