FTLX1871M3BCL Datasheet, PDF (1/12 Pages) Finisar Corporation. – 10Gb/s, 80km Single Mode, Multi-Rate SFP+ Transceiver

Product Specification
10Gb/s, 80km Single Mode, Multi-Rate SFP+ Transceiver
FTLX1871M3BCL
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 Supports 8.5 and 9.95 to 11.3 Gb/s
 80km link length
 1600ps/nm chromatic dispersion
tolerance
 -5/70°C case temperature range
 Internal transmitter/receiver CDR
 1.5W/1.7W power consumption
options
 Cooled 1550nm EML laser
 Limiting electrical interface receiver
 Duplex LC connector
 Built-in digital diagnostic functions
 RoHS-6 compliant (lead-free)
APPLICATIONS
 SONET OC-192, SDH STM-64 and
OTN G.959.1 P1L1-2D2
 10G Ethernet ZR and 10G Fibre Channel
 OTN G.709 OTU1e/2/2e FEC bit rates
 8.5Gb/s Fibre Channel
Finisar’s FTLX1871M3BCL transceivers are Enhanced Small Form Factor Pluggable
SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652
single mode fiber. They are compliant with SFF-8431¹, SFF-8432² and G.959.1 P1L1-
2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre
Channel. Finisar’s FTLX1871M3BCL transceivers use internal clock and data recovery
(CDR) IC’s for the transmitter and the receiver. This guarantees compliance with the
SONET/SDH jitter requirements and it can be used to set the electrical interface to be
XFI-compliant.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472³. Finisar’s FTLX1871M3BCL transceivers are RoHS compliant and lead free
per Directive 2002/95/EC⁴, and Finisar Application Note AN-2038⁵.
PRODUCT SELECTION
FTLX1871M3BCL
 Finisar Corporation – December 2013
Rev. B2
Page 1