FTLX1812M3BNL Datasheet, PDF (1/11 Pages) Finisar Corporation. – Extended Temperature, 10Gb/s 80km TDM XFP Optical Transceiver

Finisar
Preliminary Product Specification
Extended Temperature, 10Gb/s 80km TDM XFP Optical Transceiver
FTLX1812M3BNL
PRODUCT FEATURES
• Supports 8.5Gb/s to 11.3Gb/s
bit rates
• Hot-pluggable XFP footprint
• Maximum link length of 80km
• RoHS-6 compliant (lead-free)
• Temperature-stabilized EML
transmitter
• Duplex LC connector
• Power dissipation <3.5W
• Built-in digital diagnostic functions
• XFI Loop-back Support
• CDR bypass mode for <8Gb/s or
legacy 8GFC XFP applications
• Temperature range: -5°C to 85°C
APPL ICATIONS
• SONET OC-192 / SDH STM-64
ITU-T G.959.1 P1L1-2D2
• IEEE 802.3ae 10GBASE-ZR/ZW
80km 10G Ethernet
• Extended 80km, 10GFC 1200-SM-LL-L
and 8GFC, 800-SM-LC-L
• Supports OTN/ITU-T G.709 FEC
protocols OTU1e, OTU2, and OTU2e
• 10G CPRI
Finisar’s 80km FTLX1812M3BNL Small Form Factor 10Gb/s (XFP) transceivers comply with
the current XFP Multi-Source Agreement (MSA) Specification¹. They are a true multi-protocol
transceiver complying with 80km SONET OC-192 and SDH STM-64 per ITU-T G.959.1: P1L1-
2D2, and also support 10GBASE-ZR/ZW 80km 10-Gigabit Ethernet, 10-Gigabit Fibre Channel
1200-SM-LL-L, and all ITU-T G.709 OTN/FEC (protocols up to 11.32Gb/s. The transceiver is
also capable of supporting 8GFC, 800-SM-LC-L, with full compliance to the Tx & Rx electrical
jitter specifications by adjusting a “rate select” bit through the I²C interface. Digital diagnostics
functions are available via a 2-wire serial interface, as specified in the XFP MSA. The
transceiver is RoHS compliant and lead free per Directive 2002/95/EC³, and Finisar Application
Note AN-2038⁴.
PRODUCT SELECTION
FTLX1812M3BNL
© Finisar Corporation March 2013
Rev B1
Page 1