FTLX1772M3BCL Datasheet, PDF (1/11 Pages) Finisar Corporation. – 10Gb/s, 1310nm 40km, Single Mode, Multi-Rate SFP+ Transceiver

Product Specifications
10Gb/s, 1310nm 40km, Single Mode, Multi-Rate SFP+ Transceiver
FTLX1772M3BCL
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 17dB optical link budget for up to
40km⁽¹⁾ over G.652 single mode fiber
 Supports 6.144, 8.5G and from 9.83
to 11.3 Gb/s bit rates
 Un-cooled 1310nm DFB laser
 Receiver limiting electrical interface
 Power dissipation < 1.5W
 -5°C to 75°C temperature range
 RoHS-6 compliant (lead-free)
 Single 3.3V power supply
 Duplex LC connector
 Built-in digital diagnostic functions
APPLICATIONS
 6.144G/9.83G CPRI
 8.5Gb/s Fibre Channel
 10G NRZ SONET, SDH
 10G Ethernet and Fibre Channel
 G.709 OTN FEC bit rates
Finisar’s FTLX1772M3BCL 10Gb/s Pluggable SFP+ transceivers are compliant with
SFF-8431¹ and SFF-8432², and support 10G SONET, SDH, OTN, IEEE 802.3ae, 8x/10x
Fibre Channel and 6.144G/9.83 CPRI. The transceivers have higher optical transmit
power and better receiver sensitivity than 1310nm 10GBASE-LR and OC-192 SR-1
transceivers, and they support an optical link budget of 17dB, to compensate for the
higher fiber attenuation loss at 1310nm over 40km⁽¹⁾ of G.652 single mode fiber.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472⁶. The FTLX1772M3BCL transceivers utilize internal transmitter and receiver
re-timer IC’s for SONET/SDH jitter compliance and to enhance host cards’ signal
integrity. The optical transceiver is compliant per the RoHS Directive 2011/65/EU. See
Finisar Application Note AN-2038 for more details^7,8.
PRODUCT SELECTION
FTLX1772M3BCL
Note (1): Links longer than 30 km for the same optical link budget are considered engineered links (see Sec. IV)
 Finisar Corporation – September 2015
Rev. C1
Page 1