FTLX1672M3BNL Datasheet, PDF (1/12 Pages) Finisar Corporation. – 10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver

Product Specification
10Gb/s, 40km Single Mode, Multi-Rate SFP+ Transceiver
FTLX1672M3BNL
PRODUCT FEATURES
 Hot-pluggable SFP+ footprint
 Supports 8.5 and 9.95 to 11.3 Gb/s
 40km link length (800ps/nm)
 -5/85°C case temperature range
 Internal transmitter/receiver CDR
 low power consumption
 Cooled 1550nm EML laser
 Limiting electrical interface receiver
 Duplex LC connector
 Built-in digital diagnostic functions
 RoHS-6 compliant (lead-free)
APPLICATIONS
 SONET OC-192 IR-2/-3
 SDH STM-64.2b/3b
 OTN G959.1 P1S1-2D2b
 OTN G.709 OTU1e/2/2e FEC bit rates
 10GBASE-ER/EW
 8.5/10G Fibre Channel
Finisar’s FTLX1672M3BNL transceivers are Enhanced Small Form Factor Pluggable
SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652
single mode fiber. They are compliant with SFF-8431¹, SFF-8432², SONET OC-192 IR-
2R/3R, SDH STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and
10G Fibre Channel. The transceivers use internal clock and data recovery (CDR) IC’s for
the transmitter and the receiver. This guarantees compliance with the SONET/SDH jitter
requirements and it can be used to set the electrical interface to be XFI-compliant.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in
SFF-8472³. The optical transceiver is compliant per the RoHS Directive
2011/65/EU⁴. See Finisar Application Note AN-2038 for more details⁵.
PRODUCT SELECTION
FTLX1672M3BNL
 Finisar Corporation – September 2015
Rev. C1
Page 1